Maxspect gyre

Calireefer92

Well-Known Member
View Badges
Joined
Aug 7, 2018
Messages
653
Reaction score
189
Location
Corona
What state or country do you live in
California
Rating - 0%
0   0   0
hey reefers I have a Red Sea 425 112 gallon tank. I have 2 Maxspect gyre I’m looking for a good water flow setting for my tank just wondering what you guys think? Currently have 1 at 40% constant and one 30% constantly
 
check youtube, there are some good videos on youtube.

honestly, there are soooo many options in terms of programming it is staggering. i have mine running all sorts of programs throughout the day. from both full speed to much slower speeds and random stuff at night.
 
I was using OGC mode and i liked it a lot. Then per suggestions now i have 1 ramping up and down at 60% and the other one in Pulse mode at the same percent and it is another history.

Try it and let me know,,,.
 
I use the LTC at 50%
 
I have a pair of 250s in my 525xL and I have mine set up like this:

A: Alternating Gyre
Ramp up: 1 min
Constant: 10 min 50%
Ramp Down: 1 min
Constant: 10 min 20%

B: Alternating Gyre
Ramp up: 1 min
Constant: 10 min 20%
Ramp down: 1 min
Constant 10 min 50%

This way I get strong flow from both directions through out the day and it doesnt blow my sand bed all over the place from a constant stream. Ive been running it this way for a year or so and its a real nice steady pattern.
 
I have a pair of 250s in my 525xL and I have mine set up like this:

A: Alternating Gyre
Ramp up: 1 min
Constant: 10 min 50%
Ramp Down: 1 min
Constant: 10 min 20%

B: Alternating Gyre
Ramp up: 1 min
Constant: 10 min 20%
Ramp down: 1 min
Constant 10 min 50%

This way I get strong flow from both directions through out the day and it doesnt blow my sand bed all over the place from a constant stream. Ive been running it this way for a year or so and its a real nice steady pattern.

How do you have them placed? Both at the top? Or 1 top and the other mid tank?
 
I ended up just hooking my 2 up on my apex and setting them on an alternating schedule. I have them turn on and off each hour. 1 will run for an hour at 50% then turn off and the other side one turn on for 50% and run for an hour (only 1 ever runs at a time). This changes the flow up for me, doesn't stir sand up and have been happy with it. Running this way 2 years.
 
I have a pair of 250s in my 525xL and I have mine set up like this:

A: Alternating Gyre
Ramp up: 1 min
Constant: 10 min 50%
Ramp Down: 1 min
Constant: 10 min 20%

B: Alternating Gyre
Ramp up: 1 min
Constant: 10 min 20%
Ramp down: 1 min
Constant 10 min 50%

This way I get strong flow from both directions through out the day and it doesnt blow my sand bed all over the place from a constant stream. Ive been running it this way for a year or so and its a real nice steady pattern.
Do you mind sending me a picture of the setup? I’m having problems setting it up
 
Of the controller or of the gyres themselves?
The controller. I don’t get on how many seconds each one should be at because when I do the settings it shows 6 different ones
 
Whenever you get a chance it would help alot

Sorry - slipped my mind. Here are the picture from my controller from this morning. The first is the settings for gyre “A” and the other is for gyre “B”

1CAFA732-AC0E-400B-A995-030EC4168E36.jpeg
37DCFCCD-2762-4DE3-97FF-383F5DFFC6FD.jpeg
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 33.3%
  • I decorate AROUND the tank or stand

    Votes: 1 33.3%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 1 33.3%
  • We don’t decorate for the holidays

    Votes: 0 0.0%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new