Mesh Vs. Glass/Acrylic Top
Nick Steele
2500 Club Member
Mesh 100%
Glass/acrylic on sump is okay.
While it cuts down on evap glass/acrylic will cause issues with light penetration and salt creep.
Glass/acrylic on sump is okay.
While it cuts down on evap glass/acrylic will cause issues with light penetration and salt creep.
JJHLH
Community Member
How about a hybrid?
I went to an Ajax Glass store and for $5 they cut a thin (1/16”) piece of glass that I can lay on my mesh screen to decrease the amount of evaporation.
I‘m a newbie so I don‘t know if it is going to hurt my lighting but I only need to add a small amount of water every four days to the back of the tank which is convenient.
If it doesn’t work I’ll simply remove it.
I went to an Ajax Glass store and for $5 they cut a thin (1/16”) piece of glass that I can lay on my mesh screen to decrease the amount of evaporation.
I‘m a newbie so I don‘t know if it is going to hurt my lighting but I only need to add a small amount of water every four days to the back of the tank which is convenient.
If it doesn’t work I’ll simply remove it.
Dkmoo
Valuable Member
If you have fowler fish only, then glass/acrylic is better bc its less evaporation, provided that you have other methods of air exchange.
If you have corals, the glass/acrylic will significantly and inconsistently (so you can't even compensate with stronger lighting) impact lighting so unless you only have light-insensitive softies, in most cases mesh is far better and you live with the increased evap.
If you have corals, the glass/acrylic will significantly and inconsistently (so you can't even compensate with stronger lighting) impact lighting so unless you only have light-insensitive softies, in most cases mesh is far better and you live with the increased evap.
Just a Wrasse.
The biggest wrasse fan.
With glass or acrylic you won't have that much dust floating into your tank. Also less water will evaporate.
Just a Wrasse.
The biggest wrasse fan.
Yeah, also glass looks better then mesh.
Nick Steele
2500 Club Member
Evap is easily handled with a ato and you only fill up a container a few times a month.
My 5 gal rodi container last me 2.5 weeks about on a 20g tank
My 5 gal rodi container last me 2.5 weeks about on a 20g tank
landlubber
Valuable Member
- Joined
- Mar 20, 2017
- Messages
- 1,342
- Reaction score
- 1,205
Evaporation concerns are on the back of the list to me when compared to gas exchange, salt creep and diminished lighting IMO. All of these are also reasons 99% are either using mesh tops or none at all.
CrazyCarlitos
Active Member
- Joined
- May 14, 2019
- Messages
- 154
- Reaction score
- 114
Maybe for first few days. Haha
I personally won’t be able to handle looking at all the watermarks and salt stains after awhile. Lol
mesh all the way.
Cheaper and less hassle.
JumpGuard mesh + feed port from Octo Aquatics… and I am good to go.
Just a Wrasse.
The biggest wrasse fan.
Cool, the biggest plus with glass is low evap.
Nate Chalk
7500 Club Member
My 180 evaporates like 5+ gallons a day heh
Just a Wrasse.
The biggest wrasse fan.
Yeah, same here. It was my biggest surprise when I started my first reef tank.
Nick Steele
2500 Club Member
Yeah I’m sure surface area is key here. Mine is an aio tank so less evap due to sump as well. I have plans or a 100g and eventually a 300+G and I’m sure I’ll have a 50g ato container for the 300g and maybe a 20G for the 100g tank.
Onewolf
Active Member
Why are you so concerned with evaporation? That's why God invented ATO systems? My 5 gal ATO reservoir/jug typically lasts 7-9 days with my 90 gal tank.
OP
OP
BTimms
Active Member
This is the kind of information that has me leaning towards utilizing a mesh lid.
OP
OP
BTimms
Active Member
Y
The ATO solution solves all of my concerns, it’s just another added cost. But probably worth it?
I suppose I’m cheap, and I really shouldn’t be.
The ATO solution solves all of my concerns, it’s just another added cost. But probably worth it?
Similar threads
