Most reliable heater controller

  • Thread starter Thread starter Wbflyer
  • Start date Start date
  • Tagged users Tagged users None

Wbflyer

Community Member
View Badges
Joined
Dec 11, 2019
Messages
65
Reaction score
13
What state or country do you live in
Oregon
Rating - 0%
0   0   0
I have a Hagger 300 watt however it starting to seem that the temp from the tank is off by 1 degree. Might want to buy a back up setup. Any recommendations? Inkbird?
 
The real answer is that NOBODY makes a solid, reliable heater. The only way to be safe is to have redundant control.

Many achieve this by using a heater with it's own thermostat, plugged into a controller that has a slightly wider range. Heater's thermostat gets stuck, controller's thermostat takes over.

In my case, I've got a heater with no built in thermometer, plugged into an Inkbird controller, with _that_ plugged into my Apex. Inkbird runs the heater. If it fails, temp goes out of set range on the Apex, the Apex shuts it off, and I'm alerted. Seems a reasonable solution.

As a cheap, non Apex solution, a decent heater controller, like an Inkbird, plugged into the AutoAqua Smart Temp is probably a solid option. The AutoAqua shuts your heater down if it exceeds 84f. Not great, and not configurable, but hey, it'd help keep you from making fish soup.

As for controller brands... I've been using Inkbird for years. Currently, I've got a BRS rebranded Inkbird, but I wouldn't really recommend it over the other Inkbird offerings.

The Finnex stand alone controller looks like a solid, reasonably priced option.
 
I'd go with a Ranco temperature controller (never rely on just the heater control itself). It's a bit more pricey - but had the Inkbird...lasted a year. Had black boxes - lasted 2. I'm now installing a Ranco dual stage. Designed for industrial application and bullet proof. Temperature control isn't something I'm now willing to be supported by hobby grade suppliers. It does require a bit of wiring, but plenty of instructions out there now.
 
I have been running my heater on a reef-pi setup for the past year and have never drifted from 78 degrees with this setup that wasn't due to my own stupidity. It's been rock solid.

Plus it controls my lights and pumps and whatnot..
 
Ugh, Ok, I am running this Hagger controller but I think I will order a back up and run both. Seems these things have a lifespan of about a year...
 
I will say if you don't want to go with a controller, the Eheim Jagers are probably the most tried and true. They have a 3 year warranty. It's more about cycling frequency. So if your heaters cycle off and on a lot I'd replace annually, a couple times a day Id go longer.

Combine that with good heater size that can't overheat your tank and it's acceptable.

This isn't a recommendation just an option if you have to do without. I have at least 4 modes of protection, Eheim internal, dedicated temp controller, Autoaqua and heater size. Plus I have a separate Apex I just use for monitoring and sending me alarms. Overkill sure....but I had failure and the backups worked.
 
Last edited:
I like those, I just went ahead and ordered a Inkbird. We will see how this goes...
 

TOP 10 Trending Threads

WHAT MOST OFTEN MAKES YOU REACH FOR YOUR CAMERA AROUND THE REEF?

  • Coral behavior (feeding, extension, or movement)

    Votes: 2 8.0%
  • New growth or a color change

    Votes: 3 12.0%
  • Unusual fish behavior

    Votes: 0 0.0%
  • The whole tank looking especially good

    Votes: 8 32.0%
  • Something I want to document in case it changes

    Votes: 2 8.0%
  • A funny or unexpected interaction

    Votes: 2 8.0%
  • I usually put the camera/phone down and just watch

    Votes: 4 16.0%
  • Other (Post in the comments)

    Votes: 4 16.0%
Back
Top
Home
Post thread…
Market
What's new