Mounting a Versa on T-Slot

[Reefer911]

I need to mount two Versas on this 1/4" T Slot rail so I can set up AWCs.

I think the easiest thing to do would be to 3D print a piece that will slide into the rail, and that has a large enough area to screw the mounting bracket into. The rail will then be mounted horizontally at the back of my cabinet.

I would really appreciate someone looking into this and I'd like to get it set up before I go to Oktoberfest in Munich at the end of September.

 

[Robinson]

Get a plate that can be attached to the t slot, and attach the pump to the plate. Something like this:

There are multiple options in Amazon

 

[Reefer911]

Get a plate that can be attached to the t slot, and attach the pump to the plate.

The problem is that the holes in the plate may not align with my Versa bracket. That’s why I think a 3D printed bracket would be better.

 

[Reefer911]

The holes are exactly 1.5" apart on the Versa mounting bracket

 

[Robinson]

The problem is that the holes in the plate may not align with my Versa bracket. That’s why I think a 3D printed bracket would be better.

Just drill new holes to match the bracket?

 

[Reefer911]

Just drill new holes to match the bracket?

Yeah I can if I have to