My overflow idea

Free Phyto Promo
Spend $39+ → free 16oz Phyto · Use code FREEPHYTO at checkout · $16.99 value · Densest 6-species blend · Free shipping on every order · 100% live arrival guaranteed Spend $39+ → free 16oz Phyto · Use code FREEPHYTO at checkout · $16.99 value · Densest 6-species blend · Free shipping on every order · 100% live arrival guaranteed
Shop Now Code: FREEPHYTO

Jasonstarphire

New Member
View Badges
Joined
Apr 4, 2011
Messages
17
Reaction score
9
Location
Midwest
What state or country do you live in
Indiana
Rating - 0%
0   0   0
I have see so many black box’s, HOB overflows, and other ways to transfer water. One thing I always noticed when going to large aquariums when on vacation is the lack on equipment in the display Tanks.

this is what I wanted, a tank with the smallest eyesores, when I can afford a ghost overflow that will be next. But for now this is what I did. What do you think?

thanks

image.jpg
 
I'm guessing (since you didn't explain what you did), that you installed a single standpipe overflow?
Care to explain what we're looking at?
 
What is the function of the two on the left?

If the far left is the primary drain then does the tank drain to that level when the return pump is off? It seems like that would dump a lot of water into the sump.

If the middle is the primary drain, then what happens when a snail crawls in it and blocks it?
 
The left is the primary intake, the middle is the skimmer/overflow second intake, the right is the inflow
Have you tested a power failure with it? You must have a massive sump, or the DT isn't that big.
That's a pretty low water line. If you're relying on a check-valve to save you, they fail.
What happens if the standpipe gets clogged?
 
The tank does drain to below the primary return when power goes out, that is about 15 gallons. My sump is a 40 gallon, normally running at 12 gallons
 
DT is 90 G. The sump is in the basement. I do my water changes in the sump, so when I cut the pump and it runs to the sump I have 30 to 33 gallons I drain off for the change. Easy way to gauge a 30% water change
 
What does happen if the pipe gets clogged? I would think you would want at minimum teeth on that pipe so to deter snails from crawling up and over into the pipe.
 
Ah, I see. It looks like a snail could just happen to crawl in if it wanted to. Could the teeth be lengthened and pipe be raised to accommodate that? So a Snail would literally have to climb out of the water to get into the pipe.
 
Ah, I see. It looks like a snail could just happen to crawl in if it wanted to. Could the teeth be lengthened and pipe be raised to accommodate that? So a Snail would literally have to climb out of the water to get into the pipe.

The problem with raising the intake level on that pipe is that it is also the 'skimmer'. I would say this design needs to go back to the drawing board....
 
This tank was built and drilled 8 years ago, at that time the only overflows were bigger.
been in operation as a fresh water for seven years. Started with a marine land canister filter, moved up to a small understand sump and then to a 40 gallon sump in the basement. Tank has never overflowed.
looking at moving to a eshopps herbie now
 

TOP 10 Trending Threads

IF YOU HAD TO OPERATE EVERYTHING ELSE MANUALLY, WHICH AUTOMATED SYSTEM WOULD YOU KEEP?

  • Auto top-off

    Votes: 32 59.3%
  • Automated dosing

    Votes: 2 3.7%
  • Mechanical filtration / roller filter

    Votes: 3 5.6%
  • Automated water testing

    Votes: 2 3.7%
  • Automatic feeding

    Votes: 1 1.9%
  • Lighting schedule

    Votes: 9 16.7%
  • Controller and remote monitoring

    Votes: 3 5.6%
  • Leak detection and emergency shutoff

    Votes: 1 1.9%
  • Automatic water changes

    Votes: 0 0.0%
  • None. I prefer to operate everything manually

    Votes: 0 0.0%
  • Something else (explain in the comments)

    Votes: 1 1.9%
Back
Top
Home
Post thread…
Market
What's new