Need help with a dual switch ATO program on a RKE display.

[up.left]

If anyone here could help me program a dual floatswitch on a Reef Keeper Elite I would really appreciate it!
Both switches are on the same bracket.

Id like the bottom switch (A switch) to control the water line. I would like it to activate for 2 seconds when triggered, then turn off.

If the top switch (E switch) is triggered id like it to set an alarm to beep only and override the ato pump shutting it off.

I have the floats flipped the correct way so open is open and closed is closed.

I have done this on a reef keeper lite but the elite display is a little different and the digitial aquatics forums are now removed.

Thanks!

 

[Crabs McJones]

@n2585722 might be able to help, i'm not familiar with the elite head unit only the RKL

 

[n2585722]

Some may be referred to as 1 or 0 which one is open 0 is closed. It could also be on or off. On I think is closed and off is open. It has been awhile. Also it may be worded differently on myReef from the head unit. What are you trying to do with the switch?

 

[up.left]

Apparently this is way over peoples heads. The original post couldnt have been more detailed. Ill figure it out on my own thanks. Mods please delete my R2R account. I wont be back on here.

 

[Crabs McJones]

Apparently this is way over peoples heads. The original post couldnt have been more detailed. Ill figure it out on my own thanks.

Were just trying to help, sorry we couldn't get you the answer you were looking for.

 

[RichtheReefer21]

Apparently this is way over peoples heads. The original post couldnt have been more detailed. Ill figure it out on my own thanks. Mods please delete my R2R account. I wont be back on here.

Got Patience?

 

[n2585722]

Apparently this is way over peoples heads. The original post couldnt have been more detailed. Ill figure it out on my own thanks. Mods please delete my R2R account. I wont be back on here.

Sorry, I am trying to reply at work will on break on a cell phone. Let me look through my old files when I get home and see what I have on ATO programming.

 

[n2585722]

Below is programming for an ATO from a few years back. You will have to change the times and device id's for your system. Also the alarm and timer numbers for tue ones you use. This is a copy of a ATO single float using a trigger timer. I added the alarm at the bottom this would use the top float as a trigger. You will also need to change the ope or closed to what is appropriate for your switches. Hope this helps and sorry for my misunderstanding before. I did not read the whole post I was in a hurry when I was reading it before.

ATO pump

Mode ........................ Auto
Function ................... Switch
.......... Device ........... 08:SWA ......... ; Change appropriately for your system’s full switch
.......... On When .......... Open ............. ; Full switch Change to what is appropriate for your switch
.......... Device ............ None
.......... Off When ........ Open
Timer ....................... 20
Default ..................... Off
Standby .................... - - - -
Mode ........................ 10
Alarm ....................... 20
.......... Mode ............. OFF

Timer 20 ....................................... ; Leave everthing at default except for time on and time off

DOW ........................ SMTWTFS
Start ........................ 12:00:00AM
Time On ................... 00:00:30 ......... ; Change time on as required by your system
Time Off ................... 00:30:00 ..........; Change time off as required by your system
Repeat ..................... None
Random .................... No
Oscillate .................... No

Alarm 20 ........................................ ; Alarm to turn off ATO when there is a high level

Device ...................... 04:SWA ......... ; Change appropriately for your system
Trip .......................... Closed
Device ...................... None
Device ...................... None
Logic ........................ OR
Alert ......................... -B- ............... ; I don't remember the exact order but select the one for beep here