Need some help plumbing 500g tank

[c4sxm5]

Got my 500g inwall tank finally place and ready for water but can’t figure out how to get it plumb. Actually don’t want to plumb it and mess up/regrets so have been waiting for someone that has plumbed a tank and is knowledgeable before moving forward.

Anyone on here willing to draw/design/sketch the “right” way to plumb this setup?

Not sure if there is more than one way but any input would be helpful.

Back of tank specs:

Stand:

Sump:

 

[Dbichler]

With 5 custom holes outside of your overflows are you trying to do a closed loop system?

 

[c4sxm5]

With 5 custom holes outside of your overflows are you trying to do a closed loop system?

Had to look up closed loop to make sure my understanding is correct but I don’t think that’s what I’m doing.

The tank has 4 - 35mm holes so water can be returned back to the tank (1 on each end and 2 in the center). There are an additional 4 - 63mm holes for the 2 16” synergy external overflow boxes.

I’ll be running MP60s for flow

 

[Dbichler]

Sorry yeah I see four now don’t know how I counted 5 but anyways are they towards the top on the back glass or on the bottom

 

[vetteguy53081]

Got my 500g inwall tank finally place and ready for water but can’t figure out how to get it plumb. Actually don’t want to plumb it and mess up/regrets so have been waiting for someone that has plumbed a tank and is knowledgeable before moving forward.

Anyone on here willing to draw/design/sketch the “right” way to plumb this setup?

Not sure if there is more than one way but any input would be helpful.

Back of tank specs:

Stand:

Sump:

Very similar to mine and you will likely be doing a durso plumbing configuration

 

[c4sxm5]

Sorry yeah I see four now don’t know how I counted 5 but anyways are they towards the top on the back glass or on the bottom

Sorry yeah I see four now don’t know how I counted 5 but anyways are they towards the top on the back glass or on the bottom

2.75” from the top

 

[Dbichler]

2.75” from the top

Yeah pictures help a ton to actually see the holes and yes agree with @vetteguy53081 durso seems the likely choice just google it and follow instructions.