Need your advice...

[Stray32]

How do I get better flow to this frag rack? It's in the only spot that it will fit in my tank, so moving it isn't really an option unfortunately, and it's tucked beside my overflow as you can see, so neither of my Koralias are hitting it directly. Any brilliant ideas?

 

[Blackhawk Fan]

Can you direct the return nozzle onto it?

 

[Stray32]

My return is the PVC directly to the right of the overflow, so unfortunately that's not an option either.

 

[reefpeeper]

Were is your return?

 

[Stray32]

No other suggestions?

 

[Paul_N]

Maybe put a "Y" adapter on you return and then put some locline sections so you can direct one at the rack. That is the only solution other than adding another koralia in there.

 

[reefpeeper]

this is far out there but can you drill holes in the return facing towards the rack? it would be like a spray bar.

 

[mike_dani]

Maybe put a "Y" adapter on you return and then put some locline sections so you can direct one at the rack. That is the only solution other than adding another koralia in there.

+1 on the Line Loc. You can adjust flow with a valve and direct it however you need with the flex lines.

 

[Mavjoy]

Just add another pump inside the tank. More flow for the rack and the rest of the LS.