Neptune Salinity Probe issues

  • Thread starter Thread starter ZoWhat
  • Start date Start date
  • Tagged users Tagged users None

ZoWhat

10K Club member
View Badges
Joined
Feb 23, 2014
Messages
10,367
Reaction score
17,403
Location
Cincinnati Ohio
What state or country do you live in
Ohio
Rating - 0%
0   0   0
I just added a Salinity Probe to my sump. I've followed the Apex setup step by step.

* I'm starting the calibration with probe completely dry
* I'm using the 53000 solution
* I'm using the Apex temp probe and the solution is the same temp
* the calibration is testing 35.1 in solution
* the probe cable is isolation from any Interference

Problem is it reads 31.5 in my sump water when water is 1.025 after cross checking with calibrated refractometer

I know my skimmer pump leaks a little voltage (how much, idk)

Problem.is this skimmer pump works great and it's $300 to replace. Not doing that over a very small voltage leak.

1) is a little voltage throwing a reading of 31.5 in 1.025 water?

2) any way to mitigate this voltage? I've tried a titanium grounding cable via BRS but doesn't mitigate the voltage



.
 
Last edited:
I just added a Salinity Probe to my sump. I've followed the Apex setup step by step.

* I'm starting the calibration with probe completely dry
* I'm using the 53000 solution
* I'm using the Apex temp probe and the solution is the same temp
* the calibration is testing 35.1 in solution
* the probe cable is isolation from any Interference

Problem is it reads 31.5 in my sump water when water is 1.025 after cross checking with calibrated refractometer

I know my skimmer pump leaks a little voltage (how much, idk)

Problem.is this skimmer pump works great and it's $300 to replace. Not doing that over a very small voltage leak.

1) is a little voltage throwing a reading of 31.5 in 1.025 water?

2) any way to mitigate this voltage? I've tried a titanium grounding cable via BRS but doesn't mitigate the voltage



.
Leakage voltage can disturb the measurement.

Also, use a different calibration solution as the supplied ones are not always accurate.

It is trivial to make your own DIY calibration solution as shown in this article.

https://reefkeeping.com/issues/2004-06/rhf/index.php
 
I think they're a pain in the backside. The readings seem to depend on whereabouts in the sump the probe is placed. Give the thing a wiggle about in the water and try different places in the sump until it gives a reading that isn't stupid, and use it just to see any trends. I wouldn't trust mine further than that.
 
I think they're a pain in the backside. The readings seem to depend on whereabouts in the sump the probe is placed. Give the thing a wiggle about in the water and try different places in the sump until it gives a reading that isn't stupid, and use it just to see any trends. I wouldn't trust mine further than that.
Like any precision scientific instrument they're fussy and not forgiving of error.

Salinity probes are definately not a drop in the sump and expect a perfect reading type of measurement device. Air bubbles can make them unreliable and can flow problems in the sump.
 
Has anyone had any of the calibration fluid spill into the sump while performing calibration? I had a little fall into my sump. Are their damaging results?
 
Has anyone had any of the calibration fluid spill into the sump while performing calibration? I had a little fall into my sump. Are their damaging results?
It's potassium chloride which is harmless.

I dose potassium chloride solution to maintain potassium levels.
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 3 12.0%
  • Lighting, pumps, or other major equipment

    Votes: 4 16.0%
  • Controllers, testing, dosing, or automation gear

    Votes: 2 8.0%
  • Dry goods and restocks, like salt, media, or food

    Votes: 2 8.0%
  • Corals! Must...Have...CORALS!!!

    Votes: 6 24.0%
  • Fish or other livestock

    Votes: 1 4.0%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 4.0%
  • I’m browsing, but don’t have a specific target

    Votes: 4 16.0%
  • I’m not shopping for reef deals this year

    Votes: 1 4.0%
  • Other (Post in the comments)

    Votes: 1 4.0%
Back
Top
Home
Post thread…
Market
What's new