Hey guys just thought i would introduce myself as i will be moving to Huntsville on friday the 29th. I have been keeping saltwater for about 4 years now and im just now getting into the SPS side of reef keeping. Below you will see the start of my new build quoted from another site im a member of. Where are the good shops located in the Huntsville area?
So far the 2 mp40s and the light fixture have arrived and im just waiting to move and then purchase the tank.
Anyone have experience with steel stands? I really dig the options a steel stand provides with choices available to skinning it.
More to follow.
Jason
Well i dont have the tank yet and i havent even moved into the house that will hold this tank or decided on what size tank im going to get but im bored so i decided to start my build thread for mainly advice on equipment, fish, beer and music so on and so forth.
190 - 4 Wide (Rimless) 48 x 36 x 24 Tall this is the most likely choice with 3 sided starfire
This is the wall where the tank will go.
![]()
and this is directly behind that wall and will be used as my sump/equipment room.
![]()
Most likely i will be using the ATI 48" 10x54W Powermodule fixture. This gives me a good option for bulb choices for the exact color i want.
Equipment i own now that will likely be used is a PM Kalkreactor, SWC Mini cone skimmer, 100 rubbermaid sump, and a reefkeeper 2.
Im thinking 2-4 vortec mp 40s. I really hate the idea of putting a pump on the starfire sides of the tank so i will just put them on the back facing forward.
I have a small calcium reactor setup but not sure if it will be large enough for this setup so im debating a larger reactor or just going with 2 part.
I do plan on buying a doser when i start this build so that will be a decision i could make later into the build.
Im still unsure if i will go barebottom or sandbed. I have done both in the past with other tanks and barebottom was so much easier imo to maintain. Maybe i will epoxy a small amount of sand to the bottom just for looks and can keep high flow on it without it moving.. not sure if anyone has tried that but advice would be helpful.
here is my swc mini cone. in the process of curing/cycling some old LR thats been sitting dry for about a year. I spiked it with about 12oz of nog so its running harder then it should.
![]()
![]()
![]()
more to follow.
Well my 10 bulb ATI powermodule should be here Friday and my 2 mp40s are on there way also.
Movers will be here next Tuesday 26th to pack up my junk so it wont be long before this build gets underway.![]()
So far the 2 mp40s and the light fixture have arrived and im just waiting to move and then purchase the tank.
Anyone have experience with steel stands? I really dig the options a steel stand provides with choices available to skinning it.
More to follow.
Jason
