New guy in the area

  • Thread starter Thread starter Yerboy
  • Start date Start date
  • Tagged users Tagged users None

Yerboy

Active Member
View Badges
Joined
Jan 5, 2009
Messages
234
Reaction score
17
Location
Huntsville AL
Rating - 0%
0   0   0
Hey guys just thought i would introduce myself as i will be moving to Huntsville on friday the 29th. I have been keeping saltwater for about 4 years now and im just now getting into the SPS side of reef keeping. Below you will see the start of my new build quoted from another site im a member of. Where are the good shops located in the Huntsville area?
Well i dont have the tank yet and i havent even moved into the house that will hold this tank or decided on what size tank im going to get but im bored so i decided to start my build thread for mainly advice on equipment, fish, beer and music so on and so forth.


190 - 4 Wide (Rimless) 48 x 36 x 24 Tall this is the most likely choice with 3 sided starfire

This is the wall where the tank will go.
IMG_5527.jpg

and this is directly behind that wall and will be used as my sump/equipment room.
IMG_5525.jpg


Most likely i will be using the ATI 48" 10x54W Powermodule fixture. This gives me a good option for bulb choices for the exact color i want.

Equipment i own now that will likely be used is a PM Kalkreactor, SWC Mini cone skimmer, 100 rubbermaid sump, and a reefkeeper 2.
Im thinking 2-4 vortec mp 40s. I really hate the idea of putting a pump on the starfire sides of the tank so i will just put them on the back facing forward.

I have a small calcium reactor setup but not sure if it will be large enough for this setup so im debating a larger reactor or just going with 2 part.
I do plan on buying a doser when i start this build so that will be a decision i could make later into the build.

Im still unsure if i will go barebottom or sandbed. I have done both in the past with other tanks and barebottom was so much easier imo to maintain. Maybe i will epoxy a small amount of sand to the bottom just for looks and can keep high flow on it without it moving.. not sure if anyone has tried that but advice would be helpful.
here is my swc mini cone. in the process of curing/cycling some old LR thats been sitting dry for about a year. I spiked it with about 12oz of nog so its running harder then it should.
IMG_5646.jpg

IMG_5648.jpg

IMG_5647.jpg


more to follow.

Well my 10 bulb ATI powermodule should be here Friday and my 2 mp40s are on there way also.
IMG_0894.jpg
IMG_0895.jpg
Movers will be here next Tuesday 26th to pack up my junk so it wont be long before this build gets underway.

So far the 2 mp40s and the light fixture have arrived and im just waiting to move and then purchase the tank.

Anyone have experience with steel stands? I really dig the options a steel stand provides with choices available to skinning it.


More to follow.
Jason
 
welcome 2 R2R, lot of good folks up your way. hope the move goes well, can't wait to see your new tank in place
 
Hi Jason and welcome to the Rocket City. We have quite a few very knowledgeable reefers around the area and we look forward to making your acquaintance. Keep us posted on the progress of your build.

As far as shops in the area, there is Jason and Tammy in Cullman and Coral Reef Aquatics toward Athens. There is also the Aquarium Shop here in town that has some SW as well. If you're looking for SPS frags I have quite a few "home grown" ones and Tomoko does as well.

Keep in touch.
 
Hi Jason and welcome to the Rocket City. We have quite a few very knowledgeable reefers around the area and we look forward to making your acquaintance. Keep us posted on the progress of your build.

As far as shops in the area, there is Jason and Tammy in Cullman and Coral Reef Aquatics toward Athens. There is also the Aquarium Shop here in town that has some SW as well. If you're looking for SPS frags I have quite a few "home grown" ones and Tomoko does as well.

Keep in touch.

Thanks harry, i already looked through you thread so im sure i will be hitting you up in the future for frags.
 
Welcome to the area!
Sounds like a NARC meeting is in the works for February, maybe you can join us.
Mariner
 
Welcome to Huntsville lots of good people around here. Looks as if I will be holding the February meeting at my home I hope you will be able to make it over.

If you need any help give me a PM and I can try.
 
Wecome Jason,I think you will find that there are alot of people around here ready to help.We hope you can make the next meeting.Hope to meet you soon.
Jason&Tammy
 
Thanks for the warm welcome everyone. I would love to attend the meeting if i will be in town. At some point i will need some help moving the tank and stand into the house so if anyone wants to volunteer some help the beer/burgers are on me. :)
 
First of all, welcome to Hunstville-Madison area! Your setup looks very promising. I hope your move will go very well.

Tomoko
 
Movers came today to start packing so its finally feeling like im actually going to move.

Still not sure how im going to move my tank as the weather is very cold. I guess ill just put my fish and corals into a bucket Thursday night and take the tank down completely. Think my rock will have much die off if its out of water over 24 hours? I have a few 20 gallon containers i could put the rock in but the time it will spend in the back of my truck in 30ish deg weather could be a problem.
 
You shouldn't have much die off if you keep the rock moist. Cover it in wet newspaper if nothing else. Where are you moving from and which part of Huntsville are you moving to?

Jack
 
Jason - are you sure about that? I zoomed in and all I see is a cotton field! :baffle:
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.7%
  • Fish or coral food

    Votes: 5 5.5%
  • Test kits or reagents

    Votes: 9 9.9%
  • Filter media or replacement fleece

    Votes: 5 5.5%
  • RO/DI filters or supplies

    Votes: 14 15.4%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.0%
  • I keep a backup of everything

    Votes: 24 26.4%
  • Other (Post in the comments)

    Votes: 7 7.7%
Back
Top
Home
Post thread…
Market
What's new