Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Sorry, you can't mix match pump models to controller. Only the 280 will work with XF280 Gyre Pumps. You would need a 250 advanced controller to run the Gyre XF150/250 and that controller will only run XF 150/250 Gyre models.Can I use a 280 advance controller with a 150 gyre? For instance could I use it only on a 150 or maybe a 150 and 280 together? Thanks.
I have no information on the app at this time.Ok, sounds good. Thanks
any time line on icv6 gyre app?
The IceCap is just an interface so you will need a pump and power supply and you can run the Gyre on the Apex and will still have to write code to command the pump. The Advanced controller with the ICV6 will hook up to the Apex network in the near future.So if you have the new apex should you buy the Icecap and pump only or do you need the controller as well?
jason2459;24743387 said:I got the XF250 pump only in and broke it open.
At first glance there are no differences between the xf250 and the xf150 IF you've kept up with the latest spare parts.
But once I started taking it apart the very subtle build quality or quality control improvements was apparent and greatly appreciated. With the previous bushings it was such an extreme tight fit a hammer, vice grips, and punch out was required to remove for some of my parts. (I have a billion spare parts now...)
Everything on the xf250 was very smooth to turn, twist, take apart, put back together, etc. More so then the original xf150 with all original parts.
It seems like they listened to us or they figured it out on their own but either way its very nice how everything seems to actually fit together the way its supposed to and easily.
Also, they included snail guard sleeves which is SO much better then the useless foam that they were including that clogs up in a day. I'm going to use them as they seem perfect and exactly what I was looking for! Awesomeness. No cutting and sewing or zip ties as you'll see in the pictures below.
Is it correct to say that L.T.C. And Random modes do not spin the blades in reverse? So it would be not necessary to install 2A blades on a single pump. We would get more flow if we didn't install the same letter blades on one pump? Thank you.
You can use the icecap apex modules. I'm using those with my xf250Can I just get the pump and run it off my apex without any other controller?
Also will the magnet on the 280 hold on 3/4" plywood/epoxy?
Thanks
You can use the icecap apex modules. I'm using those with my xf250
Many things are that way unfortunately. I don't have the new advanced controller so don't know how it interfaces.So I still have to buy another item and can't just plug it into my apex and run it through that?