New Osmolator update

[rvitko Verified Sponsor]

Yes, but please be sure the fitting you have is BSP and not NPT, BSP (British Standard Pipe) is the European standard, NPT (National Pipe Thread) is the US standard and if you try to thread in NPT, it is very likely the pump housing will crack and it won't seal. BSP is generally difficult to source in the US, it is definitely available but will require some searching online, it won't be readily available at a hardware store like NPT.

 

[RTaylor117]

Yes, but please be sure the fitting you have is BSP and not NPT, BSP (British Standard Pipe) is the European standard, NPT (National Pipe Thread) is the US standard and if you try to thread in NPT, it is very likely the pump housing will crack and it won't seal. BSP is generally difficult to source in the US, it is definitely available but will require some searching online, it won't be readily available at a hardware store like NPT.

Thank you so much! Mine is NPT so I'm glad I haven't tried to hook that up yet. Very much appreciated!

 

[Horse4Fun]

Functionally it will be no different than the Osmolator 3, it just adds WIFI and this will enable set up on Tunze-hub.de and being able to receive notifications. It is likely to launch in March/April. It will really be nearly the same unit in all other respects.

Just checking in now that's its coming up on June. Any news on a launch date for the Pro/Wifi version?

 

[rvitko Verified Sponsor]

Unfortunately it is looking like at best we will see an Aug/Sept release in EU and an Oct/Nov release in the US. WIFI products, especially for the US require extensive compliance testing and since it is very expensive, everything is checked before we even submit and all of this takes a lot of time, if it emits too much in a certain frequency everything has to be reworked and done again.

 

[Muffin87]

@rvitko my trash reef factory ato just broke. How long before Pro/WiFi version is released in Europe?

It's been forever!

 

[rvitko Verified Sponsor]

It is still in testing, Felix has a prototype running on his personal tank, we are working on some feature additions (reservoir level monitoring, calibration for cable extensions, etc) and these features need a lot more testing. Likely it will be ready around Summer 2026.