new return pump

[nanonøkk]

ok so i’ve been looking for a new return pump for my nuevo 10 gal and i was wondering if anyone can help me out the numbers are getting confusing to me so any help would be nice.
the one i have is the standard one it comes with and i dont know the gallons per hour on it.

 

[Ksull72487]

ok so i’ve been looking for a new return pump for my nuevo 10 gal and i was wondering if anyone can help me out the numbers are getting confusing to me so any help would be nice.
the one i have is the standard one it comes with and i dont know the gallons per hour on it.

I’d look at a Sicce Syncra 0.5. Maybe a 1.0. Id probably go with the 0.5. Sicce makes good stuff and should fit.

It’s probably not much GPH at all. Stock ones never put out much. Lol. The 0.5 is probably close. Maybe a little more. Check the pump out. Their should be something on it that’ll give you an idea.

 

[nanonøkk]

I’d look at a Sicce Syncra 0.5. Maybe a 1.0. Id probably go with the 0.5. Sicce makes good stuff and should fit.

ok thank you for the help i was looking at that one and the numbers started to confuse me

 

[Potatohead]

MicraPlus would be good as well. The GPH is not all that critical. Between about 100-200 is fine, maybe the higher end of that if you don't have a powerhead in the aquarium

 

[nanonøkk]

also another question when i get it how much flow do i give it i have an lps tank do i run it at 50% or less

 

[nanonøkk]

MicraPlus would be good as well. The GPH is not all that critical. Between about 100-200 is fine, maybe the higher end of that if you don't have a powerhead in the aquarium

i have a smaller pump in the tank to give flow through the back of the tank

 

[Potatohead]

i have a smaller pump in the tank to give flow through the back of the tank

Then you only really need maybe low to mid 100's gph for the return pump. MicraPlus or 0.5 would both be a good choice.

 

[Ksull72487]

ok thank you for the help i was looking at that one and the numbers started to confuse me

No worries! The 0.5 is probably an upgrade. It might come in at a little more flow. But you an adjust the nozzles. Most these tanks don’t get enough stock anyways. I’d be glad the pump broke lol. Go with the 0.5. I just found something that said 92 GPH. Lol

Then you only really need maybe low to mid 100's gph for the return pump. MicraPlus or 0.5 would both be a good choice.

Agreed 100%

 

[nanonøkk]

i also have this small pump in the tank to work as a small wave maker View attachment 1851415

Then you only really need maybe low to mid 100's gph for the return pump. MicraPlus or 0.5 would both be a good choice.

ok thanks for the help

 

[nanonøkk]

No worries! The 0.5 is probably an upgrade. It might come in at a little more flow. But you an adjust the nozzles. Most these tanks don’t get enough stock anyways. I’d be glad the pump broke lol. Go with the 0.5. I just found something that said 92 GPH. Lol

Agreed 100%

ok and mine didn’t break it’s just really loud also i don’t have a output nozzle on mine like the flat black nozzle

 

[Ksull72487]

w

ok and mine didn’t break it’s just really loud also i don’t have a output nozzle on mine like the flat black nozzle

Micra will be less flow than 0.5. The 0.5 is a little beast but you may like that. Both are Sicce.

 

[nanonøkk]

w

Micra will be less flow than 0.5. The 0.5 is a little beast but you may like that. Both are Sicce.

ok thanks for the help and should i keep not having an outflow nozzle or no

 

[Ksull72487]

ok and mine didn’t break it’s just really loud also i don’t have a output nozzle on mine like the flat black nozzle

Your two options Sicce 0.5 is like 180GPH. Sicce MicraPlus is 158 GPH stock you were running about 100 GPH. A little more flow wouldn’t hurt as PotatoHead said. Both good choices.

 

[nanonøkk]

Your two options Sicce 0.5 is like 180GPH. Sicce MicraPlus is 158 GPH stock you were running about 100 GPH. A little more flow wouldn’t hurt as PotatoHead said. Both good choices.

ok thanks for the help

 

[Ksull72487]

ok thanks for the help and should i keep not having an outflow nozzle or no

Your call you’ll have to test it and see. When you set the pump up.

 

[MichaelReefer]

Go sicce for sure. It's only a 10 gallon, you dont need a huge pump. A 0.5 should work fine.

 

[nanonøkk]

Go sicce for sure. It's only a 10 gallon, you dont need a huge pump. A 0.5 should work fine.

ok thanks for the help

 

[nanonøkk]

Your call you’ll have to test it and see. When you set the pump up.

ok thanks for the help though

 

[Ksull72487]

ok thanks for the help though

Also I’d look at how your plumbing connects to the existing pump. Choose the pump you think fits best. Not a huge difference. So you may have to use an adapter or change the hose. Honestly although I can’t wait until my Return pump ticks me off. 123GPH lol on my 13.5. Just go Sicce on it. You’ll never regret it.

 

[nanonøkk]

Also I’d look at how your plumbing connects to the existing pump. Choose the pump you think fits best. Not a huge difference. So you may have to use an adapter or change the hose. Honestly although I can’t wait until my Return pump ticks me off. 123GPH lol on my 13.5. Just go Sicce on it. You’ll never regret it.

oh ok thanks for the help