New Tank with wrong holes in overflow! Help

  • Thread starter Thread starter Greg Depo
  • Start date Start date
  • Tagged users Tagged users None

Greg Depo

Active Member
View Badges
Joined
Jan 27, 2019
Messages
294
Reaction score
143
Location
Indianapolis
What state or country do you live in
Indiana
Rating - 0%
0   0   0
Guys I posted this on my build thread but I ordered a tank and the overflow holes are way to big. The three in the overflow are much larger than the 1" bulkheads I need to install. Do you guys think I could replace the bottom of the overflow with a new sheet of arcylic and drill the correct hole sizes without causing leakage? Do you guys think glue and silcone could seal that for long term?

Thanks for the help and input.

F-up.jpg
 
Wouldn’t it be easier to get larger bulkheads that would fit and use reducing PVC adapters as needed?
I thought of that but I'd have to purchase all new bulkheads and then different plumbing which I already have then after all of that it would be a 2" to 1" reduction which seems like alot.
 
I thought of that but I'd have to purchase all new bulkheads and then different plumbing which I already have then after all of that it would be a 2" to 1" reduction which seems like alot.
A few bulkheads with reducing bushings would be less than $40 I’m guessing. You can still use your 1” plumbing. No issues with going from 2” to 1”.
 
A few bulkheads with reducing bushings would be less than $40 I’m guessing. You can still use your 1” plumbing. No issues with going from 2” to 1”.
I'd have to reduce it on both ends since the overflow side would have to be 1" too
 
I'd have 2" pvc bean animal overflow then? Seems like a huge drain hole considering I only have 1" returns.
No issues with 2” overflow plumbing (inside the overflow box. You can oversized the plumbing that goes to the sump depending on flow). If it’ll fit, do it. Otherwise you can reduce that side too.
 
how big are the holes? a one inch bulkhead fits in a 1 3/4 inch hole. If the hole is 2 inches it would be a 1 1/4 bulkhead.
 
Wouldn’t it be easier to get larger bulkheads that would fit and use reducing PVC adapters as needed?
+1
No issues with 2” overflow plumbing (inside the overflow box. You can oversized the plumbing that goes to the sump depending on flow). If it’ll fit, do it. Otherwise you can reduce that side too.
+1
 
how big are the holes? a one inch bulkhead fits in a 1 3/4 inch hole. If the hole is 2 inches it would be a 1 1/4 bulkhead.
Holes are 2.5” wide. So what, like 1.25” bulkhead? Not too bad I guess. Didn’t think of the diameter of the bulkhead is much wider. Does that mess with the strength you think?
 
2.5 would fit a 1.5 bulkhead and yeah I would go with that and adapters.
 
If it was the tank builder's screw up and 1" bulkheads will fit flange and all through the holes that are there you could ask the builder to make an acrylic plate with the appropriate holes in it and send it to you along with some solvent then just glue the new plate onto the bottom...

However if they are for 1 1/2" bulkheads, honestly I'd probably step up all your plumbing to the 1 1/2"
 
Although 1" drains are adequate for your 125. Beananimal suggests that 1.5" is the smallest diameter used to get the best results. And that's probably the standard in which the company cut the holes to. It's an easy fix now rather than later. Spending a few extra dollars on 1.5" plumbing would result in less headache later on.
 
Is that the glass in your tank, or the bottom of the external overflow?
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 5 14.3%
  • Lighting, pumps, or other major equipment

    Votes: 4 11.4%
  • Controllers, testing, dosing, or automation gear

    Votes: 4 11.4%
  • Dry goods and restocks, like salt, media, or food

    Votes: 4 11.4%
  • Corals! Must...Have...CORALS!!!

    Votes: 8 22.9%
  • Fish or other livestock

    Votes: 1 2.9%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 2.9%
  • I’m browsing, but don’t have a specific target

    Votes: 4 11.4%
  • I’m not shopping for reef deals this year

    Votes: 4 11.4%
  • Other (Post in the comments)

    Votes: 1 2.9%
Back
Top
Home
Post thread…
Market
What's new