- Joined
- Nov 6, 2017
- Messages
- 290
- Reaction score
- 232
- What state or country do you live in
- Indiana
Hey everyone!
Exciting times here as I have finally reached the point of making my first batch of saltwater and filling my 150g for the first time! I'm using HW marine reefer and standard refractometer. I calibrated it using RODI water(per instructions). I had in my head 1.026 as my target, but noticed after making 145g, I have used almost the entire box. I had read on BRS to go about 1/2cup/gallon RODI. This ratio did not get me close to 1.026. I then decided to research this some and found where HW recommended 1.022 for a salinity of 34 and that going to 1.026 will make for too high salinity of 39. I can fix this by diluting with RODI, but I wanted to get everyone's opinion and confirm that I should shoot for 1.022. My refractometer displays both. Should I just go by the salinity or go by the SG, or does it matter? My plan is a mixed reef of one or two softies, LPS, and some of the easier to keep SPS's. Thank You!
Exciting times here as I have finally reached the point of making my first batch of saltwater and filling my 150g for the first time! I'm using HW marine reefer and standard refractometer. I calibrated it using RODI water(per instructions). I had in my head 1.026 as my target, but noticed after making 145g, I have used almost the entire box. I had read on BRS to go about 1/2cup/gallon RODI. This ratio did not get me close to 1.026. I then decided to research this some and found where HW recommended 1.022 for a salinity of 34 and that going to 1.026 will make for too high salinity of 39. I can fix this by diluting with RODI, but I wanted to get everyone's opinion and confirm that I should shoot for 1.022. My refractometer displays both. Should I just go by the salinity or go by the SG, or does it matter? My plan is a mixed reef of one or two softies, LPS, and some of the easier to keep SPS's. Thank You!
