Newish to the reef world

[Derrick0580]

You can always switch them out for different type of drain.

 

[Pvtgloss]

 

[I never finish anythi]

Welcome aboard.

 

[Jimbhoy13]

Welcome to R2R

 

[Brfoster77]

You can always switch them out for different type of drain.

With as much trouble as I had with leaking bulk heads, that's a last resort. I've thought of shortening one drain, (they are only 1" difference in height), but that means removing entire plumbing section. May not be a big deal for some, but I worked on mine for 3 days before I got leaks stopped.

 

[CoralB]

Welcome !! :cool:

 

[shakacuz]

welcome aboard the r2r board!

 

[Digimes]

Welcome aboard, take it slow and keep it basic. Don't chase the needle when it comes to the parameters. Maybe start a build thread and you can post questions and updates there.

 

[Gumbies R Us]

Welcome to Reef2Reef!

 

[Fish Styx]

Greetings and welcome to the reef!

 

[tharbin]

Welcome to R2R! I can't help with your overflow issues other than to advise to make very small incremental changes to the valves and watch how that change affects the flow for a while before making another change as the changes can take several minutes to reach equilibrium.

 

[cdemoss01]

Hello all. Somewhat new to the reefing world. My significant other has previously had salt water, and some coral. I on the other hand, have kept gold fish and catfish I caught in the creek. So... this is a yuuuge learning curve for me.

So now.. we just set up a tank and sump setup that was previously used, but has been sitting dry for at least 4 years. We've reused every piece that came with the setup, 200 gal dial overflow tank, plumbing, Eshopps R-200 sump, and return pump. I'm here for advice/ help/ suggestions for the plumbing/ return/ sump, as I've never had anything like this before. Don't want to overload this first thread, so, I'll go start reading what I can find, but hello to all!

Welcome to Reef2Reef!

 

[Brfoster77]

Welcome to R2R! I can't help with your overflow issues other than to advise to make very small incremental changes to the valves and watch how that change affects the flow for a while before making another change as the changes can take several minutes to reach equilibrium.

No valves are currently installed on either drain, just flexible 1" hoses.

 

[jsker]