No Drill Float Valve

[Struggle]

Does anyone know if there are any vendors that sell a no drill float valve or alternate solution? We use aquariums for water storage and will not drill them. We have (1) - 120G for tap, (1) - 120G for Caridina shrimp (mineralized RODI), (1) - 60G for tap, (2) 20G for salt, (1) 20G RODI and then a CADE ATO RODI that we would like to try and somewhat automate. If you have any other suggestions we’re all ears. Thanks.

 

[blaxsun]

Float valve for an RO?

 

[Struggle]

RO and tap off of the RO input line.

 

[Science/G]

Make a bracket for the float valve then silicon it to the glass. I had a set up like that years ago.

 

[sivob]

Like this?
https://www.coralvue.com/icecap-magnet-mount-float-valve

 

[Struggle]

Like this?
https://www.coralvue.com/icecap-magnet-mount-float-valve

That would absolutely work, thank you very much! You wouldn’t believe the contraptions I was coming up with.

 

[MoshJosh]

The Ice Cap above and eshoppes

https://www.saltwateraquarium.com/r...FFFf1bVmYGnv2myJZthujf4fZLdixQ3gaAkJcEALw_wcB

 

[All_talk]

I use standard rimmed aquariums for my storage tanks. My RODI has a float valve on the inlet from the filter just as you are intending. I have made lids for my tanks with a fixed section and removable portion. The fixed section is clamped to the tank with nylon screws and a nut plate, the float valve, tubes and cords are mounted through the fixed section.