Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
For me the best skimmer out there!!! Plus eco-tech marine service, what else you can ask for!!!!! [emoji106][emoji225][emoji886]
It's an easy small turn to remove the cup. Yours may have a problem, contact the vendor or mfg,
Who do we contact, Nyos or ecotech?
I have to use a lot of force to remove the cup, same with putting it back in.
It's not the best, for me the cup removal is a PITA!
With all the man power I have to use to remove and reinstall the cup, I don't think the acrylic will last long term.
If you read it what I posted it says FOR ME, it's my simply and personal feeling based on my experience and performance overall with this thing. What I suggest in order to the removal of the cup not be a PITA use some silicone Grease or just check it out close because may have any obstruction and you can claim a simple warranty and they will send you a new cup, A good friend of mine had a problem with the engine, they sent him a bnib and what he paid was $.99.
I have had 1 for about 4 weeks now and had to raise it about an inch and a quarter to get it to set properly, now works great.
As above a touch of silicon grease or vaseline helps with the rubber seal on the neck.
I have had 1 for about 4 weeks now and had to raise it about an inch and a quarter to get it to set properly, now works great.
As above a touch of silicon grease or vaseline helps with the rubber seal on the neck.