- Joined
- Nov 24, 2018
- Messages
- 176
- Reaction score
- 378
Hi All,
Got my tank ordered yesterday for my new setup so I thought start a build thread
I've gone slightly longer than the originally planned 30" with a 36"x 16"x 18" (LxWxH) rimless/braceless in 10mm low iron glass.
This will be my first AIO, my previous tanks have all been sumped. So I'm after some Input on construction and what sort of functionality people actually look for in an AIO setup
I'm planning a custom AIO type filter unit with a floss tray in the overflow, a built in upflow ATS, media baskets and ATO.
Here's a couple of 3D graphics of what I'm planning
From the RH end
L/H chamber is the overflow and will have an egg crate tray for floss just under the teeth, the R/H chamber will hold the ATS
From the back
L to R is the ATS, next chamber is for the media baskets, followed by the bubble trap which will hold the heater and the final chamber will hold the return and ATO sensor.
From the front
Got my tank ordered yesterday for my new setup so I thought start a build thread
I've gone slightly longer than the originally planned 30" with a 36"x 16"x 18" (LxWxH) rimless/braceless in 10mm low iron glass.
This will be my first AIO, my previous tanks have all been sumped. So I'm after some Input on construction and what sort of functionality people actually look for in an AIO setup
I'm planning a custom AIO type filter unit with a floss tray in the overflow, a built in upflow ATS, media baskets and ATO.
Here's a couple of 3D graphics of what I'm planning
From the RH end
L/H chamber is the overflow and will have an egg crate tray for floss just under the teeth, the R/H chamber will hold the ATS
From the back
L to R is the ATS, next chamber is for the media baskets, followed by the bubble trap which will hold the heater and the final chamber will hold the return and ATO sensor.
From the front