Pax Bellum reactor

[Angel53]

Hi all,
I recently installed a Pax Bellum reactor. Does anyone have one running off their calcium reactor?
Thanks,
Angel

 

[GoVols]

Hello, Angel

The flow (going in and coming out) of my cal reactor would be too slow to plumb up with any other reactor.

I run my cal reactor with it's own (Sicce 1.0) feed pump, as an stand alone setup, separate from anything that's plumbed to my manifold.

Freddie

 

[Angel53]

Hello, Angel

The flow (going in and coming out) of my cal reactor would be too slow to plumb up with any other reactor.

I run my cal reactor with it's own (Sicce 1.0) feed pump, as an stand alone setup, separate from anything that's plumbed to my manifold.

Freddie

Freddie,
Thanks for reply. I have a MTC ProCal but I thought the flow would not be enough as well. I was thinking of running the excess CO2 return line from my cal reactor to the Pax Bellum but I don't know how.

 

[BigHildy53]

I am not familiar with calcium reactors, however, there are calcium reactor connectors for the Pax Bellum reactors.

 

[Water Dog]

This thread may be helpful...

https://www.reef2reef.com/threads/geo-calcium-reactor-with-pax-bellum-algae-reactor.427983/

 

[Angel53]

This thread may be helpful...

https://www.reef2reef.com/threads/geo-calcium-reactor-with-pax-bellum-algae-reactor.427983/

Thank you. Very helpful. My MTC Procal does not require a feed pump. It comes with a Blueline circulation pump which also sucks water to the cal reactor. Will the set up of the Pax Bellum cal reactor kit be the same for my MTC?

 

[Water Dog]

I dunno, you may wanna check with Pax Bellum as to what they recommend or with @Wrasse-cal as to how he runs his set up.

 

[Angel53]

I dunno, you may wanna check with Pax Bellum as to what they recommend or with @Wrasse-cal as to how he runs his set up.

Thanks for your help.