Ok, seems we will need the experts! I'm real curious what the issue is.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Great catch! That very well could be the issue.
Ohhhh well to be continued Saturday when my meter arrives from amazon. Stay tuned @Member No 1You will need to use the tester, go on line and find the pin out for the connector, then see if the pin matches the numbers on the plastic.
Update I replaced my db9 female connector that I used. I used a continuity meter and traced the Ethernet male end that goes into the adin 1-8. To the 1 to 8 on my db9 hooked up to switches. And I get they are working and correct. So then I used 2-5 for my 4 switches and 8 for ground. Tested those through all the way to end of Ethernet. And I'm good. I plugged it into the adin. And still can't check any of the digital input boxes. I put every single switch to maint 4 which turns off skimmer. And I'll flip everyone and skimmer doesn't go off. Doesn't set maintenance 4 mode. This ish is ticking me off.
It's gotta be a program or software issueBeing unable to check off boxes sounds unrelated to anything you would connect TO the card. Having no switch connected is equivalent to having an open switch connected.
I would recommend contacting GHL
So your saying flip a switch. Then disconnect and reconnect on gcc on desktop to see if it's checked?When it's connected correctly, and you trigger a switch, click refresh in GCC and see if the check mark is there.
I don't have the ADIN card, so I can't try it, but I understand how it should work.
No, plug it in, look at the check box. Turn a switch on, then at the top there is a tab in GCC that says Refresh. Click it to see it the check mark is there.So your saying flip a switch. Then disconnect and reconnect on gcc on desktop to see if it's checked?
OkNo, plug it in, look at the check box. Turn a switch on, then at the top there is a tab in GCC that says Refresh. Click it to see it the check mark is there.