Planning Peninsula Build

  • Thread starter Thread starter radreef02
  • Start date Start date
  • Tagged users Tagged users None

radreef02

Well-Known Member
View Badges
Joined
Feb 21, 2022
Messages
876
Reaction score
328
Location
Florida
What state or country do you live in
Florida
Rating - 100%
1   0   0
Hello ! I’ve been with my RSR 200xl for about 3-4 months now and it’s been well but I am thinking about the 6 month mark my yellow tang has had it with the 2’ of room and the wife is on board for a Peninsula tank to fill up the house a bit.

current
06C0C1E3-7129-4684-8D58-3CE3C2D7AEF9.jpeg

looking to jump into a Waterbox Peninsula 4820 which is the 100g peninsula they have with 4ft.

my equipment I need to upgrade I would assume is another hydra 32 and more heat, my return pump is on low and I can just crank it up , and my skimmer is good


My concern is my wave makers, I currently have 2 mp10s but I run them at 20-30% and anymore is too much.

i will only be doing LPS and softy corals , maybe one chalice or plate corals. The nems might be going.

will 2 mp10s be enough for the 4820 ?
 
I’m following because I’m interested in the same tank you are getting. I do believe you should add a mp40 to the tank. Even though you can turn the other pumps up. That way you don’t have to worry about over working the other two pumps.
 
With peninsula the challenge is always the far end bc some people don't like to put any equipment on the far side for aesthetic reasons. If you dont mind putting an mp10 on that far side then it should be fine. If you dont want equipment showing on far side, then you may need to get creative with either 1) putting only low flow corals on that far end. Keep on mind you may also get more cyano from that side 2) get some plumbing under the sand and hide in rocks from your return pump and add flow to the far end that way.
 
With peninsula the challenge is always the far end bc some people don't like to put any equipment on the far side for aesthetic reasons. If you dont mind putting an mp10 on that far side then it should be fine. If you dont want equipment showing on far side, then you may need to get creative with either 1) putting only low flow corals on that far end. Keep on mind you may also get more cyano from that side 2) get some plumbing under the sand and hide in rocks from your return pump and add flow to the far end that way.
Definitely will only have low flow corals over there , I’ll probably consider an mp40
 
Definitely will only have low flow corals over there , I’ll probably consider an mp40
I’m currently running an MP10 on my Nuvo 40 and likely upgrading to the same peninsula tank. Have you got yours yet? The glass thickness on the 4820 is too much for the MP10 according to Ecotech but I’m curious if it works on that thickness regardless of the recommendations
 

TOP 10 Trending Threads

WHAT KIND OF REEFING DEAL ARE YOU HOPING TO PICK UP THIS BLACK FRIDAY?

  • A whole new aquarium or complete system

    Votes: 5 14.3%
  • Lighting, pumps, or other major equipment

    Votes: 4 11.4%
  • Controllers, testing, dosing, or automation gear

    Votes: 4 11.4%
  • Dry goods and restocks, like salt, media, or food

    Votes: 4 11.4%
  • Corals! Must...Have...CORALS!!!

    Votes: 8 22.9%
  • Fish or other livestock

    Votes: 1 2.9%
  • Rock, sand, or other aquascaping supplies

    Votes: 1 2.9%
  • I’m browsing, but don’t have a specific target

    Votes: 4 11.4%
  • I’m not shopping for reef deals this year

    Votes: 4 11.4%
  • Other (Post in the comments)

    Votes: 1 2.9%
Back
Top
Home
Post thread…
Market
What's new