Macca_75
Active Member
- Joined
- Jan 31, 2019
- Messages
- 375
- Reaction score
- 166
- What state or country do you live in
- Australia
My current setup has 3 x Mitras 6100 HV units (1 was running as a master, the other 2 as a slave).
Today I added a PWC card to my Profilux 3ex and confirmed config as below.
I reconfigured all the Mitras to addresses 2/3/4 on channel 11 and set them as slave
Below is 1 on the lights - they all have a unique address.
The Multi channel tab on GCC looks like this
buit all the lights are reporting 0% for every colour.
Any idea's on what else I need to do please?
Thanks
Today I added a PWC card to my Profilux 3ex and confirmed config as below.
I reconfigured all the Mitras to addresses 2/3/4 on channel 11 and set them as slave
Below is 1 on the lights - they all have a unique address.
The Multi channel tab on GCC looks like this
buit all the lights are reporting 0% for every colour.
Any idea's on what else I need to do please?
Thanks
