plexi glass frag rack?

[zapbap99]

hey is it safe to use plexi glass for a frag rack my dads work has tons so like i could get them to make that or is trhere something in it

 

[zapbap99]

or lexane is it ok?

 

[Rjramos]

Yes of course. Most frag racks are made of plexiglas. The only thing I would recommend is strong and well sealed magnets, if you are planning to hang it from the side. The most difficult part is drilling plug holes on a press, on plexiglas. It tends to crack. Lexan is softer and may be more forgiving. Drilling plexiglas I have learned that applying heat to the bit and pressing slow results in smooth cut holes.

 

[zapbap99]

I was just gonna make a hang over bar for the rack thanks for info though can just get it bent

 

[zapbap99]

Yes of course. Most frag racks are made of plexiglas. The only thing I would recommend is strong and well sealed magnets, if you are planning to hang it from the side. The most difficult part is drilling plug holes on a press, on plexiglas. It tends to crack. Lexan is softer and may be more forgiving. Drilling plexiglas I have learned that applying heat to the bit and pressing slow results in smooth cut holes.

im using lexan my dads workers will make it for me with benders and drilling etc. thanks for help!