Plumbing Help

Brandon Rush

Valuable Member
View Badges
Joined
Sep 9, 2017
Messages
1,017
Reaction score
289
What state or country do you live in
Other International
Rating - 0%
0   0   0
So I'm trying to figure out what the best way to plumb my new setup. I currently have a Reefer 170 and am working with 3/4" plumbing. My new sump accepts 1" and I would like 1". Would it be best to increase my return and overflow to 1"? Should I reduce down to 1/2" for my manifold? Or should I just keep the 3/4" all around? Any advice/pics are greatly appreciated.
 
The size really matters on the overflow. Because the overflow is fed by gravity there's a limit to how much flow can go through it, and the limit is lower than if the flow is under pressure (like on a return pump). Don't reduce the size of the overflow and you'll be okay.

Personally, if the tank is 3/4" on the overflow and the return, I would just plumb everything in 3/4" and increase the diameter when necessary to connect to your pump. 3/4" isn't a bad size to work with. It's not too small but not too big.
 
The size really matters on the overflow. Because the overflow is fed by gravity there's a limit to how much flow can go through it, and the limit is lower than if the flow is under pressure (like on a return pump). Don't reduce the size of the overflow and you'll be okay.

Personally, if the tank is 3/4" on the overflow and the return, I would just plumb everything in 3/4" and increase the diameter when necessary to connect to your pump. 3/4" isn't a bad size to work with. It's not too small but not too big.

Thanks for the reply, my goal is to do the return and overflow 1 inch to a bulkhead the reduce to 3/4 inch. Think that would work?
 
For the manifold i would keep the3/4" pvc pipe and reduce down to1/2" ball or Gaye valves for the manifold.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.5%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.9%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.2%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 10.9%
  • I keep a backup of everything

    Votes: 24 26.1%
  • Other (Post in the comments)

    Votes: 7 7.6%
Back
Top
Home
Post thread…
Market
What's new