plumbing size for 120 gallons

CEReefer

Well-Known Member
View Badges
Joined
Sep 7, 2019
Messages
589
Reaction score
329
Rating - 0%
0   0   0
Hi, I am planning a 120 gallon, 48x24x24 reef tank, it is made of acrylic will be using an external overflow with 3 drains (plumbed as a bean animal). What size drain pipe would you use? 1.5"? And for the return? 1"? I am trying to wrap my head around ratings for gravity fed flow through pipes, but maybe I am not doing a great job at it..
 

Shirak

Valuable Member
View Badges
Joined
Nov 3, 2019
Messages
2,271
Reaction score
1,250
Location
Thousand Islands, NY
Rating - 0%
0   0   0
I'd like it capable to run 1500gph (It will have about 30 gallon as a sump, so 120+30, times 10)
1.5" would give you around 2000-2100 gph max. 10x through the sump seems like alot though. Isn't the usual around 3-5x? Any reason you want to send that much water through the sump every hour?
 
OP
OP
CEReefer

CEReefer

Well-Known Member
View Badges
Joined
Sep 7, 2019
Messages
589
Reaction score
329
Rating - 0%
0   0   0
1.5" would give you around 2000-2100 gph max. 10x through the sump seems like alot though. Isn't the usual around 3-5x? Any reason you want to send that much water through the sump every hour?
To be honest, that's what's recommended around (even BRS and Triton do) and that's what I have been doing for a while (not necessarily a good thing)..

I was thinking the same, 1.5" drains, and 2 1" returns (2 Varios 6 or Sicce SDC 7.0 behind those)
 

Shirak

Valuable Member
View Badges
Joined
Nov 3, 2019
Messages
2,271
Reaction score
1,250
Location
Thousand Islands, NY
Rating - 0%
0   0   0
You can certainly go with 10, BRS says 5-10 on their website and I think I remember hearing recently on some of their videos 3x is fine. I think it kinda depends if you have any special need for that much flow through parts of the sump. 1.5" is almost 2" in OD but if that's not an issue then no matter. You will need to dial the syphon in with a gate valve on the main drain either way.

I like the 2 - 1" returns.
 

KStatefan

2500 Club Member
View Badges
Joined
Jun 24, 2015
Messages
4,080
Reaction score
3,962
Location
MHK
Rating - 0%
0   0   0
Hi, I am planning a 120 gallon, 48x24x24 reef tank, it is made of acrylic will be using an external overflow with 3 drains (plumbed as a bean animal). What size drain pipe would you use? 1.5"? And for the return? 1"? I am trying to wrap my head around ratings for gravity fed flow through pipes, but maybe I am not doing a great job at it..

The bean animal website used to have a great calculator to show flow rates of a full siphon drain. The formulas used are in the article I used these formulaes to design my full siphon drain.

I have always been surprised at the wide range of flow recommended I think innovative marine is recommending 20 times. what do you gain by have 10x over 3x?
 

DCR

Well-Known Member
View Badges
Joined
Jan 3, 2018
Messages
819
Reaction score
681
Rating - 0%
0   0   0
I don't think a 30 gallon sump could handle 1500 gph going through it. That is enough flow to fill it in about 60 seconds. There would be a torrent. If you really want 1500 gph, you need a 1-1/2" return or two 1" returns and 1-1/2" drains, but I think a single 1" return and the three 1" drains is more than adequate for a 120.
 
OP
OP
CEReefer

CEReefer

Well-Known Member
View Badges
Joined
Sep 7, 2019
Messages
589
Reaction score
329
Rating - 0%
0   0   0
I don't think a 30 gallon sump could handle 1500 gph going through it. That is enough flow to fill it about 60 seconds. There would be a torrent. If you really want 1500 gph, you need a 1-1/2" return or two 1" returns and 1-1/2" drains, but I think a single 1" return and the three 1" drains is more than adequate for a 120.
That's what I wrote, 2x 1inch returns with 2 pumps, and 3x 1.5 drains (which in a bean animal are not all 3 working at same time).
 

Sleepingtiger

Well-Known Member
View Badges
Joined
Feb 21, 2020
Messages
755
Reaction score
751
Location
Dallas
Rating - 0%
0   0   0
my tank is 95 gallons and I use a vectra s1. Even then I have it dialed back to around 60%. I use a 1" drain and have it closed around 50%. The flow I am mainly concerned about is the flow in the tank. I just don't see the benefit of 10x.
 

nereefpat

7500 Club Member
View Badges
Joined
Apr 20, 2018
Messages
7,929
Reaction score
8,687
Location
Central Nebraska
Rating - 0%
0   0   0
1.5" drains and 1" return is reasonable in a 'rule of thumb' way for that size of tank.

Do you have the overflow kit yet?
 

NowGlazeIT

Happy to help, Ask away.
View Badges
Joined
Oct 28, 2017
Messages
6,119
Reaction score
11,438
Location
Coachella Valley
Rating - 0%
0   0   0
I have that tank size. I’m using 1 1/4 bean animal drains and 2 returns 1 1/4. Single pump but it’s only at 65%. I wish I could tell you the turnover. Water is moving pretty fast in my 34gallon sump. To fast for my af-1 roller mat
 

ReefDreamz

Active Member
View Badges
Joined
May 14, 2008
Messages
323
Reaction score
426
Rating - 0%
0   0   0
I am doing a very similar build right now. 150 gallon 49.5x31x23 display. I went with 3x 1.5" drain holes in an external overflow box and 2x 1" return holes on the back wall of the tank.
 

DCR

Well-Known Member
View Badges
Joined
Jan 3, 2018
Messages
819
Reaction score
681
Rating - 0%
0   0   0
That's what I wrote, 2x 1inch returns with 2 pumps, and 3x 1.5 drains (which in a bean animal are not all 3 working at same time).
In a bean animal only the full siphon and the normal overflow are normally working. The emergency overflow is normally dry and most of the load is handled by the full siphon with only a trickle going over the normal overflow.
 

X-37B

Fight the Good Fight
View Badges
Joined
Sep 10, 2018
Messages
9,011
Reaction score
15,634
Location
Outer Limits
Rating - 0%
0   0   0
On my 120 I have 11/4" drain plumbed to a 1" to the 40 breeder sump.
1/2" return.
I only run 2-300gph through the sump.
Works well with a 7" filter sock, carx, and a Tunze 9430dc skimmer.
3x your tank volume through the sump is plenty, imo.
 

Kazumi

Active Member
View Badges
Joined
Jan 1, 2020
Messages
106
Reaction score
86
Location
SW Ohio
Rating - 0%
0   0   0
From what I have seen the 10x turnover is from the old days, when you got most of the flow in the DT from the sump return. Now a days with everyone using powerheads in the DT to create flow, the turnover through the sump can be lower, that's where the 3x-5x estimates come from.

My 120 was originally plumbed with 2each 1" drains and 2each 3/4" returns, I ran it that way for years with a 1200gph mag drive pump without any problems. I have changed it now to dual herbie drains. So it will be 2each 1" emergency drains, and 2each 1" full syphon drains. For the return I am planning on a single 1 1/4". If the old way could keep up with that mag12 pump I am confident that the herbies will be able to do at least that also, if I so chose, but I am only planning around 5x turnover.
 

Wyvern

Active Member
View Badges
Joined
Jul 6, 2021
Messages
370
Reaction score
367
Location
Pinellas FL
Rating - 0%
0   0   0
I would just build it with the largest plumbing possible regardless of what flow you end up with.

I'm running 1" for all drains and 1" return with 2X .5" outlets for 1000gph pump in my 109 bow and 40G sump.

Drains are a straight shot into sump so I could flow way more than 1000gpm running bean animal, but crazy bends and angles will demand larger tubing.
Doubling returns will halve the impact of all bends after the first T.

I build water cooled PC's and work on hydraulics so it was pretty fun plumbing my first sumped aquarium.

I think 1000-1200gph would be plenty.
 

Mastering the art of locking and unlocking water pathways: What type of valves do you have on your aquarium plumbing?

  • Ball valves.

    Votes: 68 52.3%
  • Gate valves.

    Votes: 67 51.5%
  • Check valves.

    Votes: 33 25.4%
  • None.

    Votes: 29 22.3%
  • Other.

    Votes: 9 6.9%
Back
Top