plumbing size help

icemountain

Well-Known Member
View Badges
Joined
Jun 30, 2012
Messages
641
Reaction score
132
Location
Illinois
Rating - 0%
0   0   0
Hello,

I am setting up the plumbing on my rack system which has different-sized aquariums and different size pre-drilled holes. Some are drilled for a 1.5" drain and others for a 1" and 3/4" drain. My return pump is a controllable pump with a max of 3150gph. My total system volume will be about 440-480 gallons. I am shooting for something in between 2-5x turnover. Given the different-sized holes in the tanks, what size should I make the drain and the return? I know the drain has to be bigger compared to the return.
 
In my LFS, I had 1" return lines and 1.25" overflows
 
you can sinc all those to (1) 1” drain and ...probably be fine. You would be close to siphon, but not quite there, or go in and out of siphon which will make your spouse and children stare at you with daggers (it’s SO loud).

I would personally plumb all sizes to a 1.5” return, and yes, use bushings to mate different size pipe. They sell “T’s” that are your pipe size and the off shoot is a reduced size.

If you want to feel very safe go with a 2” drain and plumb everything to that.

I push 2500gal/he...is but have all my 1” lines go different places. FWIW at that flow I only have one full siphon line and some others for catching the remainder overflow.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.5%
  • Fish or coral food

    Votes: 5 5.4%
  • Test kits or reagents

    Votes: 10 10.9%
  • Filter media or replacement fleece

    Votes: 5 5.4%
  • RO/DI filters or supplies

    Votes: 14 15.2%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 10.9%
  • I keep a backup of everything

    Votes: 24 26.1%
  • Other (Post in the comments)

    Votes: 7 7.6%
Back
Top
Home
Post thread…
Market
What's new