Reefdutch
New Member
- Joined
- Apr 20, 2026
- Messages
- 3
- Reaction score
- 2
- Location
- Netherland
- What state or country do you live in
- Other International
I am looking for help or advice on where to position my two ReefWave 25 pumps.
At the moment, it seems that debris from the water column isn't making its way into the aquarium's overflow. There is also a dead spot in the front-left corner.
I want to fine-tune or reposition the pumps, but I’ve been trying for a few days without success. Hopefully, someone can help me out.
I’ve also included a photo of my aquascape. Its a bit older pic but the scape is still the same. Unfortunalty the torches had a bail out when I was at holiday.
My aquarium:
Dimensions: 100 cm wide, 60 cm deep; water level is approximately 53 cm.
On top of the scape there are now 2 stylo and in the future i wanna place there some acropora.
In the middle of the scape I would like to place again torches and hammers. So more lps in the middle.
The overflow and return are located in the left corner.
Equipment:
2x ReefWave (left 60% and right 80% both with random wave setup)
ReefMat 500
Skimmer 300 DC
Many thanks for the help!
At the moment, it seems that debris from the water column isn't making its way into the aquarium's overflow. There is also a dead spot in the front-left corner.
I want to fine-tune or reposition the pumps, but I’ve been trying for a few days without success. Hopefully, someone can help me out.
I’ve also included a photo of my aquascape. Its a bit older pic but the scape is still the same. Unfortunalty the torches had a bail out when I was at holiday.
My aquarium:
Dimensions: 100 cm wide, 60 cm deep; water level is approximately 53 cm.
On top of the scape there are now 2 stylo and in the future i wanna place there some acropora.
In the middle of the scape I would like to place again torches and hammers. So more lps in the middle.
The overflow and return are located in the left corner.
Equipment:
2x ReefWave (left 60% and right 80% both with random wave setup)
ReefMat 500
Skimmer 300 DC
Many thanks for the help!
Last edited:
