Preventing Rust on External Pumps

  • Thread starter Thread starter Feet4Fish
  • Start date Start date
  • Tagged users Tagged users None

Feet4Fish

Valuable Member
View Badges
Joined
Jan 9, 2015
Messages
2,133
Reaction score
2,689
Location
Lynn, Indiana
What state or country do you live in
Indiana
Rating - 0%
0   0   0
Recently I refinished an Iwaki 70 from rusting that occurred around the fan assembly. This pump was in my basement fishroom. I also have in the cue a dolphin pump and a iwaki 100 that need similar work. They are both were in another guy’s basement fishroom.

Obviously the air these pumps are exposed to is salty. Any other ideas besides a dehumidifier in the room to stop or at least mitigate rusting of these metal housings, shafts and fans?
 
Recently I refinished an Iwaki 70 from rusting that occurred around the fan assembly. This pump was in my basement fishroom. I also have in the cue a dolphin pump and a iwaki 100 that need similar work. They are both were in another guy’s basement fishroom.

Obviously the air these pumps are exposed to is salty. Any other ideas besides a dehumidifier in the room to stop or at least mitigate rusting of these metal housings, shafts and fans?

Couldn't you apply some sort of coating to the exposed metal? Whether oil based or something that cures.
 
Perhaps. Which I have done that for the pumps that have already rusted. I am more talking about new pumps. For instance I will be placing a new MRC and Reeflo pumps back on the basement and i would like to prevent them from rusting.
 
It’s hard with fan cooled pumps in a fish room. Dehumidifier helps, but there’s not a lot to be done about aerosolized salt.
 
Definitely no leaks or salt creep anywhere. Salt is not supposed to evaporate with the H2O that makes your fish room humid. That’s why we add freshwater to replace. Adequate ventilation in the fish room can help tremendously. Basements can be muggy due to lack of natural ventilation.
 
I’m not sure if this would work for you but maybe get a rag and spray some wd-40 and wipe down your pumps as a part of regular maintenance. I have a ocean boat with an in board engine in it and I spray the block down with Ed-40 to make a barrier from the salt to keep it from rusting.
 
Not sure if that would work either, but it wouldn't hurt a thing! definitely will give this a try! Thanks for sharing!
I’m not sure if this would work for you but maybe get a rag and spray some wd-40 and wipe down your pumps as a part of regular maintenance. I have a ocean boat with an in board engine in it and I spray the block down with Ed-40 to make a barrier from the salt to keep it from rusting.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.7%
  • Fish or coral food

    Votes: 5 5.5%
  • Test kits or reagents

    Votes: 9 9.9%
  • Filter media or replacement fleece

    Votes: 5 5.5%
  • RO/DI filters or supplies

    Votes: 14 15.4%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.0%
  • I keep a backup of everything

    Votes: 24 26.4%
  • Other (Post in the comments)

    Votes: 7 7.7%
Back
Top
Home
Post thread…
Market
What's new