Another Apex Newbie question: So far I've learned just enough to get me in trouble; I added some lines to shut off some equipment if the high level sensor on my atk is closed to include the skimmer, power head, heaters, and the atk pump. I added the power head and heaters since I thought if the high level sensor is closed there could be a possibility that the return pump has failed and I wanted them to shut off if that happened. I floated some bags today after coming home from the fish store and everything shut off like it was supposed to when the water level hit the high sensor. Everything came back on except the heaters, which I forgot to check until I got a low temp alarm. Can somebody please help me figure out what I did wrong? Here is the code for my heaters (I have two of them and neither came back on by themselves, I do have the thermostats on the heaters themselves controlling the temp and just have the apex set to turn off the outlets if the temp gets too high):
Fallback OFF
If Tmp > 80.0 Then OFF
If Output Ret_Pump_3 = OFF Then OFF
If Output Water_Change = ON Then OFF
If High CLOSED Then OFF
If Power Apex Off 000 Then OFF
Fallback OFF
If Tmp > 80.0 Then OFF
If Output Ret_Pump_3 = OFF Then OFF
If Output Water_Change = ON Then OFF
If High CLOSED Then OFF
If Power Apex Off 000 Then OFF