Reefi-Labs Uno 2.0 pro

[Reef Stallion]

How are the colors with this mix?I suppose the red sea ad a great shimmer.How many would you recommend for an aquarium that is 250x80 cm?

The channels on the Reefi are individually programmed so you can set the colors as you wish. I believe the IV helps the coral “pop”. I turn on the green and white channels during peak hours so I can enjoy the fish more but I don’t think those channels add much additional PAR.
As far as recommendations, I would ask Daniel at Reefi.

 

[Bruttall]

Pre Loaded LPS Reefi Uno 2.0 setting, 82watts at peak, 45par in 27 inches of water at sand line, 145par mid level, 310 par at 1 inch, measurement taken directly under light, 90 degree reflectors. Mounted 12 inches above water line.

Par-Wise is the meter I used. I am acclimating my tank to a 99 watt peak over the next few days, then I'll take a few more readings. My goal is to get as close to 100 at sand bed as I can without going more than 200 at mid level.

 

[Reef Stallion]

Just checked and the Reefi Uno 2 Pro do come with the 90 degree reflectors installed. So that’s what I have hooked up.

 

[airvicconcre]

Awaiting your par readings.

 

[Bruttall]

Mounted 12 inches above water line, 90-degree reflectors.
readings taken as close to directly under light as I could manage. I did let meter drift and try and find the "hotspot"
Waterline 540par
13 inches 200par
27 inches sand line 95par.

These lights really are powerful.

 

[Superlightman]

Mounted 12 inches above water line, 90-degree reflectors.
readings taken as close to directly under light as I could manage. I did let meter drift and try and find the "hotspot"
Waterline 540par
13 inches 200par
27 inches sand line 95par.

These lights really are powerful.

that par values are not so high it was at 100%, can't be no? only 95 par on the floor that is deceptive , I read some speak about 400?

 

[VintageReefer]

that par values are not so high it was at 100%, can't be no? only 95 par on the floor that is deceptive , I read some speak about 400?

The screenshot shows the channel percentages, looks like most channels are 40% or less

 

[Superlightman]

The screenshot shows the channel percentages, looks like most channels are 40% or less

ah sorry didn't check that

 

[DanyL]

that par values are not so high it was at 100%, can't be no? only 95 par on the floor that is deceptive , I read some speak about 400?

I’m getting 1000 to 380 PAR top to bottom on 2 separate tanks.

Main tank is mounted 30cm (12”) above water line, running at 130W, and frag tank mounted 50cm (19”) at 219W - both use 90deg reeflectors.

 

[Superlightman]

I’m getting 1000 to 380 PAR top to bottom on 2 separate tanks.

Main tank is mounted 30cm (12”) above water line, running at 130W, and frag tank mounted 50cm (19”) at 219W - both use 90deg reeflectors.

THANKS : -)

 

[dr_vinnie_boombatz]

does it have a feed mode?

 

[twentyleagues]

does it have a feed mode?

For lights? Not that I have seen or even looked for.

 

[nereefpat]

Do you mean an "acclimation" mode?

 

[Superlightman]

does it have a feed mode?

if you turn off the lights for feed the fish you will have problems..

 

[bruceosterberg]

I put in my order yesterday. Can't wait to get them.

The build I am doing is right next to my desk so I wanted something that was good quality and did not have the extreme glare. I love the radions but the glare was bothering me.

I want to order too, how long will it take to get your shipment? I leave town in 15 days.

 

[twentyleagues]

I want to order too, how long will it take to get your shipment? I leave town in 15 days.

You wont regret it. I think it took about a week to get mine.

 

[bruceosterberg]

You wont regret it. I think it took about a week to get mine.

Tnx. I appreciate it.

 

[dr_vinnie_boombatz]

if you turn off the lights for feed the fish you will have problems..

I don't have fish, only coral. I usually dim the lights when feeding as surface agitation stops. This is something AI supports is why I asked