Reefkeeper Lite

Genomecop · Jul 1, 2018

How do you use two heaters with the Lite? Are they both plugged into the power bar?

n2585722 · Jul 1, 2018

You can use two heaters as long as they do not exceed the max outlet current or max powerbar current with everything else on that power bar included. I am not sure how many outlets you have but you would need two open outlets to do this. You would just program each outlet using the heater function. Yiu can also set one at a little lower temp than the other.

hwntunda · Jul 1, 2018

What SID are you using? The silver one did V2? Or black Sid V2? I tried updating to my reef 2.0 but says my Sid V2 (silver) isn’t recognized.?

n2585722 · Jul 1, 2018

I do not have the silver SID, but it is the latest version so it should work with myReef.

hwntunda · Jul 1, 2018

Anyone willing to let me borrow or rent their newest Sid version ( not silver) so I can update?

n2585722 · Jul 1, 2018

There are only two versions the original (black) which had to be sent back to DA and get modified to work with mReef and the SID v2. I have two of the black versions that had to be sent back to DA to get them to work. The newer SID you have should work without any issues. Have you tried a different USB port or a different computer?

hwntunda · Jul 1, 2018

n2585722 said:
There are only two versions the original (black) which had to be sent back to DA and get modified to work with mReef and the SID v2. I have two of the black versions that had to be sent back to DA to get them to work. The newer SID you have should work without any issues. Have you tried a different USB port or a different computer?

Yup, 2 computers, 6 different ports also deleted and reinstalled my reef with no avail.

n2585722 · Jul 1, 2018

Sometimes mine will come up with the SID has the wrong firmware, but it does update it when I slelect update firmware. Then it will work. Was it working and just quit? Are you trying to update firmware? If so none has been changed in a long time.