reefkeeper ph probe

[kth132]

I think I have a bad ph probe. They seem hard to come by on line. I want to order a decent one. My question is can I only use standard issue DA probe or will another brand work ?

 

[Randy Holmes-Farley]

If the connectors are standard (and most are BNC connectors these days) then any pH probe will work on any pH meter. :)

 

[pickupman66]

I personally use the brs probes and have used ones from amazon with success.

 

[n2585722]

You did not mention which reefkeeper you have but I have used a Pinpoint and a generic probe from Bulk Reef Supply on my RKE without any issues.

 

[Jimbo]

I went with the BRS lab grade Ph probe on my Reefkeeper. Any standard Ph probe will work

 

[kth132]

Thanks for all the feedback! I have the rke elite. I bought it used but he shipped it with the original cap and water I went to calibrate it last night and it was bouncing around a lot between about 10 it wouldn't find a set number like my previous ReefKeeper so I was thinking I either have some bad fluid or pH probe figured I would just order both to be on the safe side

 

[n2585722]

Try just leaving it in each cal solution over 10 minutes before you continue to the next step.

 

[kth132]

I left it for 45 min. In hope it would stop. Lol.

 

[n2585722]

Don't worry about the raw data changing just leave it for over 10 minutes. The raw data will never settle completly.

 

[kth132]

Right on turns out the pH probe is working fine.