Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Anybody know if the Aquatic Life T5/LED Hybrid fixtures will hold the new Red Sea ReefLED 90s? Thanks
With additional screws to connect the red sea to the hybrid LED brackets it can be done. If I remember they are M4 screws around 32mm long.Any update on this? Can red sea 90 light fix in a hybrid fixture with t5s?
Wont this rust overtime?Yes it works just fine, it is what I run. Use M4 screws 35mm with flat head like these and a washer. Home Depot should have them in store. The flat head allows the light cover to attach securely.
M4-0.7 x 35 mm Phillips Flat Head Stainless Steel Machine Screw
I'm considering the aquatic life 48 inch hybrid with my redsea led 50s. I have 3 over my redsea 425 xl. 3 questions. Can you post a picture of your mount and setup? Are you happy with it? Is it the dimmable with 1 cord or the 2 cord model?This worked for me, 35mm M4 with washers for the RedSeaLED50.
I don't like how they did the cover. Its a pain to pry off. I wish they had made it so the screws threaded through the cover.
The 50 fits perfect in with 16" end caps.
I have to buy the brackets for the 16" end cap though. Seems like one set could have come with that without raising the cost too much, but for now this is just resting across the fixture.
edit: one thing I realized, the 50s are shallower then the 90s too. I had to rotate the unit so the display and reset button are on the side in order to be able to access them. It looks like this is not an issue with the 90s.
Yes you canAny update on this? Can red sea 90 light fix in a hybrid fixture with t5s?
This worked for me, 35mm M4 with washers for the RedSeaLED50.
I don't like how they did the cover. Its a pain to pry off. I wish they had made it so the screws threaded through the cover.
The 50 fits perfect in with 16" end caps.
I have to buy the brackets for the 16" end cap though. Seems like one set could have come with that without raising the cost too much, but for now this is just resting across the fixture.
edit: one thing I realized, the 50s are shallower then the 90s too. I had to rotate the unit so the display and reset button are on the side in order to be able to access them. It looks like this is not an issue with the 90s.