Refractometer Reading

ReefGirl87

Active Member
View Badges
Joined
Jan 27, 2020
Messages
416
Reaction score
334
What state or country do you live in
Michigan
Rating - 0%
0   0   0
Ok guys- I thought I knew how to operate a refractometer- HOWEVER. I’m on my 3rd one thinking the first 2 were duds. I’m getting the same reading on all 3, but something totally different from my hydrometer. The refractometer is giving me a negative reading. I calibrated it to 0 with calibration solution. Cleaned it off then applied my tank water. My hydrometer is reading 31...what the heck am I doing wrong??!
 
I just use a hydrometer .... I can't help... Did you do what link81 said ?
 
only with RO water do you set it to zero. with the solution, you set it to 35.
easy mistake. no worries. we've all been there lol.
Lol, for sure! I didn’t even think about the RO vs calibration solution! Thanks again! I got an accurate reading now! It is a little lower than my hydrometer, but it’s a lot closer than what it was! My refractometer says 27, hydrometer 32. Opinions on which is more accurate?
 
yup, i thought so. definitely go by then refractometer then.
I don't calibrate every use, but fairly frequently. the solution is cheap.
Make sure you keep it capped though, if anything evaporates then the solution will be inaccurate.
i actually keep a few on hand just to cross check between all of them.
 
Lol, for sure! I didn’t even think about the RO vs calibration solution! Thanks again! I got an accurate reading now! It is a little lower than my hydrometer, but it’s a lot closer than what it was! My refractometer says 27, hydrometer 32. Opinions on which is more accurate?
I would trust the refractometer. I have used hydrometer for making beer and suspect the same would apply for SW, any little air bubble or difference in temperature other than what it is calibrated for will make it off. Even the if the scale/ paper can be off in the tube. Usually with cheaper hydrometers you want to measure at the temp it is set for and note any difference so you can adjust later. Most refractometers self adjust for temp.
 
I got mine from BRS and it said not to use distilled water, only 35 PPT fluid. The one I have for beer making is to use water to zero out, not a double imperial NE style IPA :p . If you get one, follow the directions
 
I only keep shoreline Cnidaria and I use the floating glass hydrometers and allow the tank parameters to swing pretty broadly compared to what deep sea lifeforms can handle, so I would definitely say that you should do as advised here and keep taking wellcalibrated readings across several refractometers to keep swings at a minimum.

The plastic hydrometers are practical when throwing together a saltwater mix that can be adjusted later on to appropriate values but I wouldn't use them for actual precision readings.

At least now you have several refractometers & having replacement gear always gives more peace of mind to enjoy the hobby :)
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new