Refurbishing AI Prime HD16 to make it cool again

SecSeePanda

Community Member
View Badges
Joined
Feb 28, 2025
Messages
31
Reaction score
54
Location
Socal
What state or country do you live in
California
Rating - 0%
0   0   0
I bought my tank used and it came with one ai prime that was working great but like everyone else's I noticed a few months later on my lens had started to melt. so I did what anyone with a newly acquired addiction and bought yet another used light to match (hehe) but that one had a problem with the power supply (I got it cheap) so hopped on amazon got a new one... but still had that melted lens, so i email the company, they give me 2 lenses and fan dust caps free of charge, ended up also buying 2 new fans (one of mine was getting a bit wobbly)

okok so i had looked into this before and went in with a game plan, tore them both apart cleaned them all up added THERMAL PASTE (big yes) and put on the new fans and slapped them back together. Ever since then they have been rock solid and have gotten nowhere near the temps as before.

something i want to do next is to buy a power supply that can handle both lights for the sake of freeing up one plug

thanks for coming to my TED talk

takeaway from this:
The thermal paste REALLLLLLLY makes a big difference
You dont need to buy the ai branded wall plug...
Their customer service is great
 
I bought my tank used and it came with one ai prime that was working great but like everyone else's I noticed a few months later on my lens had started to melt. so I did what anyone with a newly acquired addiction and bought yet another used light to match (hehe) but that one had a problem with the power supply (I got it cheap) so hopped on amazon got a new one... but still had that melted lens, so i email the company, they give me 2 lenses and fan dust caps free of charge, ended up also buying 2 new fans (one of mine was getting a bit wobbly)

okok so i had looked into this before and went in with a game plan, tore them both apart cleaned them all up added THERMAL PASTE (big yes) and put on the new fans and slapped them back together. Ever since then they have been rock solid and have gotten nowhere near the temps as before.

something i want to do next is to buy a power supply that can handle both lights for the sake of freeing up one plug

thanks for coming to my TED talk

takeaway from this:
The thermal paste REALLLLLLLY makes a big difference
You dont need to buy the ai branded wall plug...
Their customer service is great
I love it!
 
What is cheaper is buying a split plug on amazon. 1 plug for two ballasts.
I am considering that... I would ideally like to get rid of some of the wiring. Maybe I'm overthinking it.
 
I am considering that... I would ideally like to get rid of some of the wiring. Maybe I'm overthinking it.
Well it depends .. If you go quality sealed plastic bricks as you go up in power they really go up in price. If you go cheap Chinese well it's cheap Chinese ..best to buy 2.
If you go from sealed bricks to say wire frame you can get quality that might even last longer due to better thermal dissipation.

One good thing is you can probably squeeze in some extra power handling to soften the load on the ps. Not too many lights come with larger than needed ps's wattage wise.
 
Well it depends .. If you go quality sealed plastic bricks as you go up in power they really go up in price. If you go cheap Chinese well it's cheap Chinese ..best to buy 2.
If you go from sealed bricks to say wire frame you can get quality that might even last longer due to better thermal dissipation.

One good thing is you can probably squeeze in some extra power handling to soften the load on the ps. Not too many lights come with larger than needed ps's wattage wise.
its funny you mention wire frame since i was considering getting some sort of distribution block or something for all the 12 and 24 volt stuff i have.

both my lights - 24v
my return pump- 24v
UV-24v on a smart plug with homekit
wave makers- 12v
skimmer-12v on a smart plug with homekit
ph meter-12v
temp-12v
ato-12v on a smart plug with homekit
doser-12v

something Ive considered
but i also feel like a crackhead and want to tinker to keep myself form moving things INSIDE the tank

ORRRRR

say *** it and invest in a Hydros controller...
 
Where did you apply the thermal paste?
the thermal paste became the interface between the heatsink and the back of the puck of LEDs... so it would look like

fan
heatsink
(thermal paste here)
ledpuck
lens

So on the heatsink and the back of the puck of LED'swhere they make contact with each other should of had thermal paste applied from the factory but neither of mine had any.

Pumping all that heat and having a microscopic gap of delicious insulating air... mmmm melted plastic lenses anyone??? (dont forget salt spray on your lenses those create hot spots, clean your lenses!!!!)

so now we have a thermally conductive goop helping instead of insulating the heat transfer away from the LED's

Ive noticed warmer exhaust and quiter fans and cooler bodies meaning they are working as intended i feel more confident in them and ill report if they decide to poop out later on..... (ive had them modded this way for 3 months now btw)

I think next time if i ever decide to open them again maybe in a year, Ill replace the thermal paste with a PTM sheet which is a sheet of thermally condive material vs a paste.
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 4.5%
  • I decorate AROUND the tank or stand

    Votes: 4 18.2%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 13 59.1%
  • We don’t decorate for the holidays

    Votes: 4 18.2%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new