Removing montipora from post. Is there an easy way?

[Mal11224]

Was wondering if there is an easy way to remove the montipora below from it's post without breaking it into pieces. Would like to place it on a rock if possible or is it easier to just leave it alone?

 

[AdamNC]

You can gently use a chisel or a thin flathead screwdriver to pry it off or just leave it be and it will encrust the plug. If you don't like the stem, a pair of thick wire cutters can snap the stem off easily.

 

[ReeferMaddness843]

Even a razor blade should work. That's how I remove acro from the plug for gluing to rock work.

 

[Mal11224]

I was thinking to use a chisel. I just remember when I placed it in the tank, I actually chipped it a little bit. I appreciate the advice. Will see what I can do. May leave it attached if I get too nervous. Lol.

 

[ReeferMaddness843]

Worst case, it breaks and you now have 2. :D

 

[Coral Addict]

Depends if your trying to be gentle. They easiest is probably a hammer

 

[mrtian97]

I would leave it alone, it will grow over it

 

[mtraylor]

dremel

 

[mtraylor]

This is blade I use it works great for cutting through the rock etc.
https://www.walmart.com/ip/UBO-EZ54...2129&wl11=online&wl12=673981647&wl13=&veh=sem

 

[Mal11224]

This is blade I use it works great for cutting through the rock etc.
https://www.walmart.com/ip/UBO-EZ54...2129&wl11=online&wl12=673981647&wl13=&veh=sem

Thanks mtraylor. I have one of those and may try to use it. It should definitely get into the post and free it.

 

[mtraylor]

Np. Just be careful when you cut it. The blade pops back a bit and can take a finger off.

 

[adtravels]

Np. Just be careful when you cut it. The blade pops back a bit and can take a finger off.

I agree, if using a dremel when fragging use extreme caution

 

[tautog83]

If it's not encrusted on the plug just use sps bonecutters and cut at the glue it will come right off

 

[reeferfoxx]

Should be easy to pop off with hands and gloves. Keep the frag plug in the tank and grow another!