Replacing the battery on Ecotech battery backup...

[FlyPenFly]

Anyone have luck putting in a LifePO4?

 

[ca1ore]

No, but regular replacement went just fine. I think I know why the old one stopped working.

 

[albano]

... I think I know why the old one stopped working.

Are you ‘positive’ ?

 

[ca1ore]

Ha ha ha …. yeah, all the times I speculated idly about why this or that died …. not much ambiguity here. I was a tad too aggressive in drilling out the rivets though, even machine screws won’t work now.

 

[ChicagoReef]

Thanks so much for the post. Super easy thanks to the learning above. Getting the rivets out correctly was the hardest part. My unit is like new now.

 

[Tahiti]

Just ordered mine from Amazon and will replace it finally. I’ve had mine since 2013 and it’s been dead for years! Crazy how they want over $200+ for a replacement.

 

[Tahiti]

Just replaced it and it was shockingly easy to drill the rivets out. Saved myself $170 :beaming-face-with-smiling-eyes:

 

[Dan Reef]

Hello!

Can I replace the lead acid battery for this one? Amazon link

It's the same 18AH 12V, however it's LIFEPO4.

Is there any challenge for the replacement?

 

[DeeBee]

Hello!

Can I replace the lead acid battery for this one? Amazon link

It's the same 18AH 12V, however it's LIFEPO4.

Is there any challenge for the replacement?

I have the same question. Not sure if it requires modification to charge properly.

@telegraham Thoughts?

 

[TangerineSpeedo]

Hello!

Can I replace the lead acid battery for this one? Amazon link

It's the same 18AH 12V, however it's LIFEPO4.

Is there any challenge for the replacement?

I think.... If you are going to use a LifePo, you need to use an appropriate float charger for a lithium battery. That and I heard that lithium and NSW are not friends so you have to keep the enclosure in a dry place.

 

[TelegrahamTested LLC]

I have the same question. Not sure if it requires modification to charge properly.

@telegraham Thoughts?

No modification required. Mine is charged with the stock supply that came with the Ecotech battery.

No safety concerns. The package is sealed like a lead acid, and LiFePO4 is generally non-flammable. https://humble.fish/community/threads/replacing-the-battery-in-ecotech-backup.4442/

 

[DeeBee]

No modification required. Mine is charged with the stock supply that came with the Ecotech battery.

No safety concerns. The package is sealed like a lead acid, and LiFePO4 is generally non-flammable. https://humble.fish/community/threads/replacing-the-battery-in-ecotech-backup.4442/

Thank you for the info.


I have replaced my lead acid battery many times over the years but this 20Ah LiFePO4 seems to be the same size as stock and a decent price. I think I will give it a try.

https://www.renogy.com/12v-20ah-trolling-motor-lithium-iron-phosphate-battery/

 

[TelegrahamTested LLC]

Thank you for the info.


I have replaced my lead acid battery many times over the years but this 20Ah LiFePO4 seems to be the same size as stock and a decent price. I think I will give it a try.

https://www.renogy.com/12v-20ah-trolling-motor-lithium-iron-phosphate-battery/

It should fit. I know others have used Miady batteries. Mine has two smaller Miady packs.

 

[cilyjr]

I have replaced mine with a LiFepo4. It works fine.

The charger that comes with it is a generic Eaton charger. It has both over charge and temp protection for the battery it's charging.

 

[cilyjr]

How do you control them on/off and regulate power etc? If it were that easy I would run everything off of one big backup, via a couple power-strips

The Eaton EAC145160 controls the power going in.

 

[DeeBee]

It's not the most inexpensive option at $70, but this Renogy battery is a direct replacement. Fits perfect and weighs about half of a Lead Acid.

I did have to replace the stock O-ring connector with larger spades for them to fit in the Renogy's screw terminals. Because they are taller it also puts them pretty close to the screw tabs of the housing so I put some electrical tape on them to be safe.

So far, so good. 12.9 volts. Still charging to full. I'll let everyone know if I have any issues.

 

[Marco_99]

I think.... If you are going to use a LifePo, you need to use an appropriate float charger for a lithium battery. That and I heard that lithium and NSW are not friends so you have to keep the enclosure in a dry place.

Correct. It’s a smart idea to use a lifePo4 charger or you could kill the performance, damage, or shorten the life span of the battery. Lithium bats don’t charge like a lead acid

 

[nhbegli]

This thread is a bit old but does anyone know where to buy a replacement for the input/output DC jacks that connect the internal battery to the outside (the red/black internal wiring)? I have to replace this part but can't find anything on it