The stock return in my nano cube has suddenly decreased its output dramatically, I've taken it apart and it was almost perfectly clean, and when set in the "normal" operating position Impeller (N/S) it seems to work normally, but for the normal position to be used as a return pump, (impeller(E/W) it gets noisy and produced very little flow and gets pretty warm.
I have a K1 for circulation, and also have a K nano on the way along with an Aquac remora nano with a MJ 900, I've read the remora works much better with a MJ 1200, and have been thinking of purchasing a 1200 for the aqua C and using the 900 as a return, anyone see any problems with this? I'll just use the stock pump for mixing salt.
Before the pump started acting up the tank would clear from a thorough sand stirring in about 15 minutes, now its constantly silty due to my pistol shrimp and what not.
I have a K1 for circulation, and also have a K nano on the way along with an Aquac remora nano with a MJ 900, I've read the remora works much better with a MJ 1200, and have been thinking of purchasing a 1200 for the aqua C and using the 900 as a return, anyone see any problems with this? I'll just use the stock pump for mixing salt.
Before the pump started acting up the tank would clear from a thorough sand stirring in about 15 minutes, now its constantly silty due to my pistol shrimp and what not.
