Riptide Aquaculture | 3D Printing Parts & Pieces Everywhere Thread

RiptideAquaculture

10K Club member
View Badges
Joined
Aug 5, 2021
Messages
14,605
Reaction score
16,089
Location
Florida
Rating - 100%
12   0   0
We’ve recently started diving into the world of 3D printing and wanted to share the journey here! Our very first project was converting large reactors into bio-pellet reactors to better fit the needs of our systems. It’s been a fun (and sometimes challenging) learning curve, but seeing a design go from CAD to a working piece of equipment in our tanks has been awesome.

We’re running a Bambu Labs A1 printer and using Autodesk Fusion for modeling. So far, it’s been a great setup for turning ideas into real, functional parts.

This thread will be a place where we post what we’re making—whether it’s reactor conversions, racks, mounts, or whatever crazy ideas come up next. We’ll share photos, lessons learned, and things that worked (and maybe some that didn’t).

We’d also love inspiration from the community. What tools, parts, or gadgets would make your reefing life easier? If you’ve got an idea, drop it here—we might try to bring it to life with the printer.

First round of designs and reactor conversions coming soon. Stay tuned! 🐠🛠️
 
We’ve recently started diving into the world of 3D printing and wanted to share the journey here! Our very first project was converting large reactors into bio-pellet reactors to better fit the needs of our systems. It’s been a fun (and sometimes challenging) learning curve, but seeing a design go from CAD to a working piece of equipment in our tanks has been awesome.

We’re running a Bambu Labs A1 printer and using Autodesk Fusion for modeling. So far, it’s been a great setup for turning ideas into real, functional parts.

This thread will be a place where we post what we’re making—whether it’s reactor conversions, racks, mounts, or whatever crazy ideas come up next. We’ll share photos, lessons learned, and things that worked (and maybe some that didn’t).

We’d also love inspiration from the community. What tools, parts, or gadgets would make your reefing life easier? If you’ve got an idea, drop it here—we might try to bring it to life with the printer.

First round of designs and reactor conversions coming soon. Stay tuned! 🐠🛠️
Should try and make a nano roller matt
 
The first project we tackled was creating bio-pellet reactor plates for a few Bashsea 6-18 Media Chambers that we weren’t using.


The first version I printed actually gave us the best results out of all the designs I tested. It wasn’t my ideal print, though, since it required a lot of supports—the entire piece was a single solid print.


What really made this version work well was how the bottom plate seated perfectly, which in turn forced the top plate to sit perpendicular against the chamber wall, ensuring even distribution all the way around.
IMG_2255.jpg IMG_2256.jpg IMG_2257.jpg

Here are several different renditions I made that ultimately didn’t perform as well. Most of the changes were aimed at breaking the part into multiple pieces to save on material or print time, or experimenting with different hole patterns to see how they affected pellet movement.

I could probably rebuild the original design as a two-piece print to eliminate the need for supports, but after running through 5–6 variations we kept coming back to that very first version—it just worked the best.


IMG_2252.jpg IMG_2251.jpg

IMG_2246.jpg IMG_2247.jpg

IMG_2250.jpg IMG_2249.jpg

IMG_2253.jpg IMG_2254.jpg

In conclusion, the reactor itself still needs additional modification to flow properly. The current output fitting is just a little too small to relieve the pressure created by the pump. You can see this in the flexing of the top plate during operation and especially during the initial filling of the chamber.


As soon as the water level reaches the output fitting, there’s a significant decrease in pellet agitation. The next modification will be to enlarge the output hole and install a ¾" bulkhead with PVC plumbing to handle the flow correctly.
 
Ideas:
- Flow Disperser
- Coral Frag Rack? Know lots of companies do this, but like to find cheaper ones for my tank
- Coral Transporter, such as a cup with frag holes to put corals for transportation maybe
 
Our latest creation is a frag rack stand built to work with standard ½” PVC legs, making it easy to adjust the height for any tank. This first print was made to test thread width tolerances—and now that it’s a success, we’re ready to crank out a million more!
20251017_185413_366545A2-5906-4A8F-8ED8-2E6A5CD40B07.png


20251017_185523_7A902E04-0591-4DE9-BAC2-96CC7B8F418B.png



20251017_185736_12B82FE1-A733-425E-8513-6321E4A81C1E.png


20251017_185752_33CC1DF7-FA19-4552-836D-5EECF3D2C895.png


Here is the updated design, and the first batch.
20251017_185248_B8EC91D7-4648-4D70-BAF2-2813958F2613.png


20251017_185327_73654DC8-CA51-4AB2-81AD-B9BCDDE9A27C.png
 
Let me follow you :D I’ve just started getting into 3D stuff for my little tank too. The fish are the main thing — tinkering is just a hobby.
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 11 37.9%
  • I’d trust someone who knows my tank to choose

    Votes: 0 0.0%
  • I’d rather get a gift card and pick it myself

    Votes: 10 34.5%
  • I’d prefer gear or supplies instead

    Votes: 0 0.0%
  • Please don’t surprise me with livestock

    Votes: 8 27.6%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new