RO Buddie with DI attachment cartridge replacement

SinkyShippy

2500 Club Member
View Badges
Joined
Mar 10, 2019
Messages
2,591
Reaction score
3,082
What state or country do you live in
New Jersey
Rating - 100%
1   0   0
I purchased the 100gpd RO Buddie with DI attachment awhile back. The DI cartridge now needs to be replaced because most of the beads have changed color.

Does anyone know when the other cartridges need to be replaced (the membrane, carbon cartridge, and sediment cartridge)?
 
depends on how much water is being produced by the unit and your water TDS. Membrane's last few years, carbon and sediment usually once/year. RO Buddie units dont have transparent cartridge casing, making it difficult to visually monitor carbon and sediment cartridge conditions (one of the reasons when upgrading my RODI, I switched from RO Buddie to diff brand w clear canister holders). Check your owner's manual and keep track of water production rate, if performance decreases even though DI resin is good its usually sign carbon and sediment need replacing.
 
The carbon and sediment, I change every 6 months because they are cheap.
For DI, I just repack the canister cause that’s cheaper.
The membrane should last quite a while provided it is not drying out from not using on a regular basis.
This membrane would need changing when you notice a big jump in TDS.

So if your out of the tap is say 200 TDS and before DI is 20TDS or higher, change the membrane.

Good membranes have a rejection rate of 96-99% and should last a few years...
 
Can you repack the DI canisters? I was always scared to try to unscrew them as they have been known to break? I hate buying the $20 replacement canisters, cheaper to buy resin and change it myself
 
I purchased the 100gpd RO Buddie with DI attachment awhile back. The DI cartridge now needs to be replaced because most of the beads have changed color.

Does anyone know when the other cartridges need to be replaced (the membrane, carbon cartridge, and sediment cartridge)?

Don't go by the color change. You should go by the tds of the water coming out of the di cartridge. When it is > 0 you need to change it. If you go by just the color change you could be wasting weeks or months worth of good di resin.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.7%
  • Fish or coral food

    Votes: 5 5.5%
  • Test kits or reagents

    Votes: 9 9.9%
  • Filter media or replacement fleece

    Votes: 5 5.5%
  • RO/DI filters or supplies

    Votes: 14 15.4%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.0%
  • I keep a backup of everything

    Votes: 24 26.4%
  • Other (Post in the comments)

    Votes: 7 7.7%
Back
Top
Home
Post thread…
Market
What's new