RO/DI pressure lost

[Tank2379]

I have lost pressure in my RO/DI unit. My home water pressure is reading 60psi when I turn on my RO/DI the pressure reads 5 psi and nothing is really being produced. Could there be a clog somewhere in the lines that could cause this? Any suggestion would be appreciated

Thanks

 

[Idoc]

Is your membrane flush valve open? When flushing the membrane, there is no product water produced and the psi on the gauge will drop a lot...but the waste water line will have a strong flow!

 

[Tank2379]

Is your membrane flush valve open? When flushing the membrane, there is no product water produced and the psi on the gauge will drop a lot...but the waste water line will have a strong flow!

No value is closed to produce water. I did empty the canisters out to make sure there wasn't any clogging. For some reason chamber 1 and 2 filled up fast once it came 2 the third chamber it is filling up very slow as if it was in the DI stage. I have a 5 stage unit the third chamber is the 0.6 carbon block. I took the housing apart but didn't see anything that would cause it to clog. It weird that this would happen. So not even sure what to do. [emoji20]

 

[Idoc]

Sorry, not sure what it would be if you don't see a blockage. Maybe BRS will respond with an idea... Maybe just give them a call.

 

[Tank2379]

Sorry, not sure what it would be if you don't see a blockage. Maybe BRS will respond with an idea... Maybe just give them a call.

I figured out the issues, took out all the filters pressure went back to normal. 2nd chamber Carbon block seemed to be clogged reason for the pressure lost. I took it out until I can order new filters. But its making water now and my TDS is reading 001 PPM out of the DI

 

[randyBRS]

Hey there!

Sorry I missed this thread, but the troubleshooting you did was absolutely what we would suggest! We will have a group buy coming to R2R next weekend (8/12) with carbon blocks on 15% OFF! :)

Please let me know if there is anything I can help with.

-Randy