RODI Auto flush not working

[Odenac]

Hello I'm needing help, I was running through my DI resin too fast, I replaced the auto flush, pressure switch, and auto stop valve on my RODI unit and it's doing the same thing, I also noticed my pressure gauge doesn't hit 60 psi like it used to when the booster pump is running, I can't even get 55 gallons without exhausting my DI resin. I just recently started having this issue before my only problem was the pump would not shut off automatically but I would just unplug it at the end of the day so it wasn't a huge deal.
I'm using BRS 150 gallon a day unit
My tap water TDS is 177 and on my RODI unit it's 200 before the DI filters.

 

[KrisReef]

The RO is either being bypassed or it is broken.

RO should lower the TDS to at most 17 if it is working properly.

 

[Odenac]

The RO is either being bypassed or it is broken.

RO should lower the TDS to at most 17 if it is working properly.

What could cause the RO to get bypassed? Cause I'm pretty sure that's the issue, since my filters are only 2 months old, I usually get a little over a year out of them safely

 

[Odenac]

I'm dumb, I found out the problem, I connected the auto shut off valve wrong, I could've sworn I connected it exactly how I removed it but I guess I swapped the outlet sides. I fixed that issue and now my auto flush is also working properly, my pump is now running at 60psi and is actually auto shutting off