RODI storage tank and stand.

[Hitman]

Almost done with the stand for my 200 gallon storage tank. It's 30"x30" and 24" tall. I shortened myself a 2"x6" to brace the legs that I'll have to wait for Lowe's to open in the morning. The picture makes it look like there's only 3 legs but there is 5 legs each corner and one center, then 2"x 6" frame work with 5" centers. Tomorrow at noon the tank will be delivered and I can plumb it. BRS 7 stage RODI with water saver upgrade has been mounted and ran for 2 hours into the drain to fully flush it.
Sure going to be a nice upgrade from the 50 gallon Brute trash can I've been using!

 

[Flippers4pups]

Nice!

 

[Hitman]

Let the water making start!

 

[Hitman]

Very very impressed with the BRS water saver upgrade kit for my BRS 7 Stage Pro System its running at 94 psi and I've already made 20 gallons of RODI water in 1-1/2 hours!!!

 

[Hitman]

94 psi on the gauge and 1 tds going into stage 1, 0 tds going into stage 3, and 0 tds going into the storage tank.

 

[Hitman]

Had to replace the cheapo Lowe's ball valve with one made for a 2500 gallon stock tank. The one from Lowe's started to drip through the valve at 50 gallons as I was unaware they are not pressure rated! The new one is rated for 500 PSI so it better not leak!!! Lol

 

[Rython]

@Hitman how is the water tank stand holding up? I just picked up the same tank and am looking for a stand solution.