RODI unit question

jimmypencil

Well-Known Member
View Badges
Joined
May 29, 2021
Messages
549
Reaction score
249
Location
south carolina
What state or country do you live in
South Carolina
Rating - 100%
1   0   0
used RODI unit for second time ever today and my DI resin canister already looks super brown/rust colored. Tds in to di is 5 and tds out is still zero. Is this an issu

I have a BRS 6 stage 150gpd. I’ve used it once. Flushed water for an hour before first use and for a few minutes after. This was 3 weeks ago.

1679BF03-7304-461B-B02C-23DF323A3C34.jpeg
 
I'm not sure but that looks like it is half empty of water.

FYI, The membrane and the resin should remain full of water at all times.
 
I'm not sure but that looks like it is half empty of water.

FYI, The membrane and the resin should remain full of water at all times.
Water is running through the whole canister. It does look like that in the pic. So this abnormal tho?
 
Is your water treated with chloramines? If so, that will burn through the DI resin quickly.
 
This is caused by air in the system. When you set up the RODI it needs to be empty. Then when filling the water will push the air out. If water is in the system when started it will look like this. Easy fix, dump all water out and refill.
 
Water is running through the whole canister. It does look like that in the pic. So this abnormal tho?
This is caused by air in the system. When you set up the RODI it needs to be empty. Then when filling the water will push the air out. If water is in the system when started it will look like this. Easy fix, dump all water out and refill.
 
This is caused by air in the system. When you set up the RODI it needs to be empty. Then when filling the water will push the air out. If water is in the system when started it will look like this. Easy fix, dump all water out and refill.
What do you mean dump all the water out? Like unscrew the containers? I used the flush valve for 5 minutes before filling my container is that what you mean?
 
Were they empty when you started it? Sometimes air gets trapped in line like that. When it does, I empty it out and refill it.
 
Were they empty when you started it? Sometimes air gets trapped in line like that. When it does, I empty it out and refill it.
When I used it a month ago it was brand new so yea it was empty. All I did when I was done filling the container is turn the flush valve on and let water run through for a few minutes then shut off the faucet. Is there something else I should have done? Not sure how I would empty it.
 
Open the canister. Dump it. Make sure when they are closed well. Refill. If it still doesn’t fill all the way up air is somehow getting it. Check to make sure all the tubes are pushed in all the way. Shouldn’t be air in the tubes when making water either. That’s a sign of air getting in also
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 4.5%
  • I decorate AROUND the tank or stand

    Votes: 4 18.2%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 13 59.1%
  • We don’t decorate for the holidays

    Votes: 4 18.2%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new