Salinity checker

[Randy Holmes-Farley]

don’t think anyone is doing conductivity tests, least not someone asking the question originally asked.

Here's a frequently posting member of this forum discussing his new conductivity meter:

New (to me) toy- conductivity meter

I’m just excited and nobody outside this forum would care 😁

www.reef2reef.com

 

[davidm777]

The Hanna salinity checker is a conductivity test isnt it?

Hanna makes conductivity and digital refractrometer. If you are referring to the hand held then yes. Is conductivity.

 

[Sneak]

Do you know the know the hydrometer is accurate?

I'm not saying it isn't, but you assume it is when it might not be.

What did you calibrate the Hanna with? I have a concern that its calibration fluid may be the thing that makes folks frequently find it reads low, not the device itself.

I am using the official 35ppt calibration fluid that comes from Hanna. I see your point of view how it could be the fluid and not the device itself - my rebuttal to this is if you cannot guarantee the official calibration fluid that comes with the Hanna is accurate, then that is precisely why I would prefer to use the hydrometer that doesn't need said calibration fluid.

I also see what you mean when you question if the Hydrometer is accurate - its possible - though unlikely - that its inaccurate. That said, if both methods could be inaccurate, id prefer the one that doesn't require recalibration because if the calibration fluid is compromised, then you could be off and fluctuating salt levels based on those compromised calibration fluid packets.

I don't have a strong opinion on not using Hanna Checkers, but this is just something to consider.

 

[Randy Holmes-Farley]

I am using the official 35ppt calibration fluid that comes from Hanna. I see your point of view how it could be the fluid and not the device itself - my rebuttal to this is if you cannot guarantee the official calibration fluid that comes with the Hanna is accurate, then that is precisely why I would prefer to use the hydrometer that doesn't need said calibration fluid.

I also see what you mean when you question if the Hydrometer is accurate - its possible - though unlikely - that its inaccurate. That said, if both methods could be inaccurate, id prefer the one that doesn't require recalibration because if the calibration fluid is compromised, then you could be off and fluctuating salt levels based on those compromised calibration fluid packets.

I don't have a strong opinion on not using Hanna Checkers, but this is just something to consider.

FWIW, commercial standards seem to be all over the map in quality, and it seems not unreasonable to use one of known quality. :)

Maybe someone can check one of these Hanna fluid packets for its actual conductivity. :)

 

[jeremie]

Here’s a quick comparison between a newly perchased bottle of Hach's 53.0 mS/cm standard, a DIY 3.24% KCl solution, and Hanna calibration fluid.

The Hanna checker was first calibrated with the Hach standard to 35 ppt

The measurement of the DIY solution isn’t far off

However, the measurement of the Hanna calibration fluid results in a noticeably higher reading

I also checked other packets of the calibration fluid from the same box, and all of them showed similar results. This does seem to align with reports from many reefers that the Hanna salinity checker often shows lower readings compared to other instruments.

 

[Dread Pirate Dave]

Here’s a quick comparison between a newly perchased bottle of Hach's 53.0 mS/cm standard, a DIY 3.24% KCl solution, and Hanna calibration fluid.

The Hanna checker was first calibrated with the Hach standard to 35 ppt

The measurement of the DIY solution isn’t far off

However, the measurement of the Hanna calibration fluid results in a noticeably higher reading

I also checked other packets of the calibration fluid from the same box, and all of them showed similar results. This does seem to align with reports from many reefers that the Hanna salinity checker often shows lower readings compared to other instruments.

Thank you! I'm ordering some of Hach's standard now.

 

[Randy Holmes-Farley]

Interesting. This would explain a lot of problems with the Hanna.

 

[Randy Holmes-Farley]

I posted an alert about it in the main forum:

Hanna salinity checker Issues may be their calibration fluid

Many folks find the Hanna reads low. One way that could happen is if their calibration fluid is off, and that appears it may be the case. If you have a Hanna, I’d make a diy or get a better brand calibration fluid, such as Hach. This link shows a test...

www.reef2reef.com

 

[Poseidons Reef]

I keep my water temp at 78 and adjust my salinity to read 1026 using the TM hydrometer. If I understand correctly as long as the temp is between 77 - 78 the 1026 should be accurate. I plan on getting a 2nd hydrometer just in case one breaks but also curious to see if both read 1026.

 

[Randy Holmes-Farley]

I keep my water temp at 78 and adjust my salinity to read 1026 using the TM hydrometer. If I understand correctly as long as the temp is between 77 - 78 the 1026 should be accurate. I plan on getting a 2nd hydrometer just in case one breaks but also curious to see if both read 1026.

Assuming your particular TM hydrometer is accurate, that is correct. :)

 

[reefmaster70]

Here is my wine hydrometer that is calibrated at 72f. Spot on 1.026, so I know my tank, and my refractometer is accurate as well.