tbrown
Nominated Cronie Intern - Might be failing?
I am not grumpy looking!I love how grumpy Timmy looks
Sam's Oceanic 120 - DIY solutions
- Build Thread
- Thread starter Projects with Sam
- Start date
- Tagged users None
tbrown
Nominated Cronie Intern - Might be failing?
tbrown
Nominated Cronie Intern - Might be failing?
Speaking of Cuttlefish... Here's a Jellyfish.
OP
OP
Projects with Sam
5000 Club Member
Awesome! stoked when I can make someones reefing experience better!
www.reef2reef.com
Done With Filter Socks! Much Easier Way!
So tired of pulling out, cleaning in the washing machine, buying bleach, & replacing filter socks! Too much work! Replaced filter socks with these inexpensive, 3D printed filter cups! Now I replace a small piece of filter floss once a week in just a couple of seconds. Big thanks to @Projects...
www.reef2reef.com
OP
OP
Projects with Sam
5000 Club Member
Bummed I came home last night and found my Yellow Coris Wrasse and learnt to fly...
he had gotten big in the tank. He was still wet so I tried to resuscitate him in the tank but he was already gone... I bet If I had been 1/2 hour earlier I could have saved him.
he had gotten big in the tank. He was still wet so I tried to resuscitate him in the tank but he was already gone... I bet If I had been 1/2 hour earlier I could have saved him.
crusso1993
7500 Club Member
Sorry bud.Bummed I came home last night and found my Yellow Coris Wrasse and learnt to fly...
he had gotten big in the tank. He was still wet so I tried to resuscitate him in the tank but he was already gone... I bet If I had been 1/2 hour earlier I could have saved him.
OP
OP
Projects with Sam
5000 Club Member
Posted a bunch of new products!
parlaquatics.com
for the Aquamaxx Bullet 2 Hang-On Back Skimmer
parlaquatics.com
parlaquatics.com
parlaquatics.com
parlaquatics.com
parlaquatics.com
parlaquatics.com
parlaquatics.com
Skimmer CO2 Scrubber Cap
3D printed skimmer cap to hold bags of soda lime to reduce CO2 in the skimmer air intake. The top cap has two 6.5mm O.D. tubes protruding from the rim. These tubes should be attached to the skimmer air input. If your skimmer is not listed, contact me and I can add it. This is still in...
parlaquatics.com
4" Filter Sock Cup - Filter Sock Replacement System
Filter Sock cup for 4" Filter Sock holders. Getting tired of dealing with those huge filter socks? Look no-further... There are two ways to get the perfect filtering replacement for felt or mesh filter socks: Complete: Use some filter floss. Use included template and cutout as many disks of...
parlaquatics.com
EcoTech XR15 Light Shade Model 1
This light shade is designed for the XR15 aquarium light by EcoTech. It works on gen 3-6 XR15s. Its been tested on the Gen6 version but will also fit many other XR15 models.
parlaquatics.com
Twist nut for 4545 extrusion - 6mmTube (12 pack)
This small piece of plastic twists securely into 4545-style aluminum extrusion and allows 5.5 to 6.5mm aquarium airline tubes to be managed.This part, once twisted into place on the extrusion, can support four tubes and keep them well-organized while still leaving them visible. Strong PETG+...
parlaquatics.com
Twist nut for 4545 extrusion - 6mmTube Long (12 pack)
This small piece of plastic twists securely into 4545-style aluminum extrusion and allows 5.5 to 6.5mm aquarium airline tubes to be managed.This part, once twisted into place on the extrusion, can support four tubes and keep them well-organized while still leaving them visible. Strong PETG+...
parlaquatics.com
Twist nut for 4545 extrusion - Hook (12 pack)
This small piece of plastic twists securely into 4545-style aluminum extrusion and allows wires or similar to be cradled in-place.This part, once twisted into place on the extrusion, can support many wires and keep them relatively well-organized while still leaving them accessible. One-hand...
parlaquatics.com
Twist nut for 4545 extrusion - ZipTie (12 pack)
This small piece of plastic twists securely into 4545-style aluminum extrusion and allows wires or similar to be Zip-Tied in-place.This part, once twisted into place on the extrusion, can have up to two zip-ties securing things. One-hand operation for those tough to access places.Convenient...
parlaquatics.com
Twist nut for 3030 extrusion - 6mmTube Long(12 pack)
This small piece of plastic twists securely into 3030-style aluminum extrusion and allows 5.5 to 6.5mm aquarium airline tubes to be managed.This part, once twisted into place on the extrusion, can support four tubes and keep them well-organized while still leaving them visible. Strong PETG+...
parlaquatics.com
You’re a rockstar!Posted a bunch of new products!
for the Aquamaxx Bullet 2 Hang-On Back SkimmerSkimmer CO2 Scrubber Cap
3D printed skimmer cap to hold bags of soda lime to reduce CO2 in the skimmer air intake. The top cap has two 6.5mm O.D. tubes protruding from the rim. These tubes should be attached to the skimmer air input. If your skimmer is not listed, contact me and I can add it. This is still in...
4" Filter Sock Cup - Filter Sock Replacement System
Filter Sock cup for 4" Filter Sock holders. Getting tired of dealing with those huge filter socks? Look no-further... There are two ways to get the perfect filtering replacement for felt or mesh filter socks: Complete: Use some filter floss. Use included template and cutout as many disks of...EcoTech XR15 Light Shade Model 1
This light shade is designed for the XR15 aquarium light by EcoTech. It works on gen 3-6 XR15s. Its been tested on the Gen6 version but will also fit many other XR15 models.Twist nut for 4545 extrusion - 6mmTube (12 pack)
This small piece of plastic twists securely into 4545-style aluminum extrusion and allows 5.5 to 6.5mm aquarium airline tubes to be managed.This part, once twisted into place on the extrusion, can support four tubes and keep them well-organized while still leaving them visible. Strong PETG+...Twist nut for 4545 extrusion - 6mmTube Long (12 pack)
This small piece of plastic twists securely into 4545-style aluminum extrusion and allows 5.5 to 6.5mm aquarium airline tubes to be managed.This part, once twisted into place on the extrusion, can support four tubes and keep them well-organized while still leaving them visible. Strong PETG+...Twist nut for 4545 extrusion - Hook (12 pack)
This small piece of plastic twists securely into 4545-style aluminum extrusion and allows wires or similar to be cradled in-place.This part, once twisted into place on the extrusion, can support many wires and keep them relatively well-organized while still leaving them accessible. One-hand...Twist nut for 4545 extrusion - ZipTie (12 pack)
This small piece of plastic twists securely into 4545-style aluminum extrusion and allows wires or similar to be Zip-Tied in-place.This part, once twisted into place on the extrusion, can have up to two zip-ties securing things. One-hand operation for those tough to access places.Convenient...Twist nut for 3030 extrusion - 6mmTube Long(12 pack)
This small piece of plastic twists securely into 3030-style aluminum extrusion and allows 5.5 to 6.5mm aquarium airline tubes to be managed.This part, once twisted into place on the extrusion, can support four tubes and keep them well-organized while still leaving them visible. Strong PETG+...
OP
OP
Projects with Sam
5000 Club Member
Thanks! Getting an AI 16 shade out soon too.
Petcrazyson
5000 Club Member
Cthulukelele
2500 Club Member
Always hard to lose a fish. At least you gave it a good life while it was in the tank. Sorry for your lossBummed I came home last night and found my Yellow Coris Wrasse and learnt to fly...
he had gotten big in the tank. He was still wet so I tried to resuscitate him in the tank but he was already gone... I bet If I had been 1/2 hour earlier I could have saved him.
Petcrazyson
5000 Club Member
N1tew0lf1212
...Cronies Secretary...
Hey bro ParlAquatics is poppin now....awesome glad to see things are moving along.....it sucks losing a fish bro.....when you said resuscitate i totally though this but then realized shortly after I was the only one thinking that.....smh sorry bro
tbrown
Nominated Cronie Intern - Might be failing?
Almost got me but I looked at it yesterday during my Rock Roll run. Thanks though!
Petcrazyson
5000 Club Member
So close
OP
OP
Projects with Sam
5000 Club Member
OP
OP
Projects with Sam
5000 Club Member
crusso1993
7500 Club Member
A pal hooked me up with my first torch and a couple of digi/birdsnest
frag tank shots: (after vacuuming up all the cyano)
random shots:
The green flash 1 minute before lights out...
I saw this same post somewhere last night. Or maybe I’m having a dé ja vu. Or maybe I’m a soothsayer and don’t even know it! In any case, nice score and great reminder of what this hobby is all about. Taking care of marine life and each other!
OP
OP
Projects with Sam
5000 Club Member
I meant to post it on my thread but put it on franks accidentally. was burning some midnight poil last night.
What’s poil?
Similar threads
