Seeking feedback on refrigerated auto-feeder plan

monicalooze

Active Member
View Badges
Joined
Sep 28, 2020
Messages
264
Reaction score
256
Location
Minneapolis
Rating - 0%
0   0   0
Screen Shot 2022-05-13 at 12.26.45 PM.png

This is the plan for my auto-feeder. The biggest question I have is whether using the RODI line to clean out the food line will work, and what kind of valve/T fitting I need in the middle to prevent water/food flowing into the wrong place. Thoughts?

TIA!
 
You're going to have food sitting in your ATO line until the next time the ATO kicks in. Plus, depending on the length of the run, you'll have to pump a stupid amount of food to push it through.
EDIT: I also don't know if it's possible to have your doser push that stuff up through the tubing the way you have it.
 
I have a canister filter. See diagram. I can time it so the doser on the ATO happens right after the food doses. My tank runs with lily pipes, so I dose RODI based on evaporation.
 
Yeah - I don't think it will work the way I had it... (bear with me while I learn plumbing on a public forum).

But I think I could do it like this guy's:
https://www.bareefers.org/forum/threads/diy-fresh-food-auto-feeder.28120/
1652470257763.png


Except, instead of flushing the lines by creating a closed loop with the sump, tank water, and an extra circulation pump, I would connect the RODI line directly to a manifold inside the fridge, then use the four channel doser to inject food into the manifold, and finally flush the line right after the food is injected using the RODI line on a separate dosing pump.

I have to add over a liter(~1200ml) of RODI into my tank over 12 dosing intervals per day, so there is plenty of fresh water running through the system to flush the lines.
 
Or...Would it make more sense to run the inflow tube from the canister through the fridge and then use a venturi to inject the food directly into my inflow (in reef language, return line)? I can't decide...the risk with the manifold is that it gets clogged because the RODI water isn't flowing constantly, and I think the risk with the inflow tube is that the food will sit mixed in the manifold forever. You're not supposed to mix reef nutrition products long term, and the original design from Bay Area Reefers (Squist), avoids this.

Thoughts @ReefSquad? @Reef Nutrition?
 

WHEN YOU SEE A REEF2REEF POLL, WHAT’S YOUR USUAL MOVE?

  • Vote right away, then head to the comments

    Votes: 10 43.5%
  • Read the comments first...then decide what I think

    Votes: 0 0.0%
  • Vote and explain my choice in the comments

    Votes: 2 8.7%
  • Dude, I just vote...I don't care about the comments

    Votes: 10 43.5%
  • Vote, then come back later to see how it turned out

    Votes: 1 4.3%
  • Pick “Other” because my opinion is too nuanced to fit any of your simpleton boxes

    Votes: 1 4.3%
  • I usually read the comments but exercise my right not to vote

    Votes: 0 0.0%
  • I always get excited about Daniel’s daily polls, obviously 😎

    Votes: 3 13.0%
  • Other (Post in the comments)

    Votes: 2 8.7%
Back
Top
Home
Post thread…
Market
What's new