Seeking feedback on refrigerated auto-feeder plan

monicalooze

Active Member
View Badges
Joined
Sep 28, 2020
Messages
264
Reaction score
256
Location
Minneapolis
Rating - 0%
0   0   0
Screen Shot 2022-05-13 at 12.26.45 PM.png

This is the plan for my auto-feeder. The biggest question I have is whether using the RODI line to clean out the food line will work, and what kind of valve/T fitting I need in the middle to prevent water/food flowing into the wrong place. Thoughts?

TIA!
 
You're going to have food sitting in your ATO line until the next time the ATO kicks in. Plus, depending on the length of the run, you'll have to pump a stupid amount of food to push it through.
EDIT: I also don't know if it's possible to have your doser push that stuff up through the tubing the way you have it.
 
I have a canister filter. See diagram. I can time it so the doser on the ATO happens right after the food doses. My tank runs with lily pipes, so I dose RODI based on evaporation.
 
Yeah - I don't think it will work the way I had it... (bear with me while I learn plumbing on a public forum).

But I think I could do it like this guy's:
https://www.bareefers.org/forum/threads/diy-fresh-food-auto-feeder.28120/
1652470257763.png


Except, instead of flushing the lines by creating a closed loop with the sump, tank water, and an extra circulation pump, I would connect the RODI line directly to a manifold inside the fridge, then use the four channel doser to inject food into the manifold, and finally flush the line right after the food is injected using the RODI line on a separate dosing pump.

I have to add over a liter(~1200ml) of RODI into my tank over 12 dosing intervals per day, so there is plenty of fresh water running through the system to flush the lines.
 
Or...Would it make more sense to run the inflow tube from the canister through the fridge and then use a venturi to inject the food directly into my inflow (in reef language, return line)? I can't decide...the risk with the manifold is that it gets clogged because the RODI water isn't flowing constantly, and I think the risk with the inflow tube is that the food will sit mixed in the manifold forever. You're not supposed to mix reef nutrition products long term, and the original design from Bay Area Reefers (Squist), avoids this.

Thoughts @ReefSquad? @Reef Nutrition?
 

TOP 10 Trending Threads

WHICH SUPPOSEDLY EASY CORAL HAS GIVEN YOU THE MOST TROUBLE?

  • Zoanthids or palythoas

    Votes: 13 21.7%
  • Mushrooms or Ricordea

    Votes: 12 20.0%
  • Green star polyps

    Votes: 7 11.7%
  • Xenia

    Votes: 7 11.7%
  • Leather corals

    Votes: 6 10.0%
  • Duncan or candy cane corals

    Votes: 13 21.7%
  • Birdsnest or Montipora digitata

    Votes: 15 25.0%
  • None—mine have lived up to the reputation

    Votes: 4 6.7%
  • Other (tell us which one)

    Votes: 3 5.0%

New Posts

Back
Top
Home
Post thread…
Market
What's new